Output Voltage	12V 15V 5V

Descripción
Comentarios de clientes(0)

Item specifics

Brand Name Your Cee
Origin CN(Origin)
Certification NONE
Output Current 3.5A
is_customized Yes
Model Number positive and negative voltage negative voltage reversal power supply
Output Type DUAL
Output Power Switch Power Module

Product Description

This module adopts TPS54360 chip, the maximum load current of positive pressure can reach 3.5A, and the theoretical conversion efficiency can reach 91%. The chip has overheating, overvoltage and frequency foldback protection. When using it for a long time under high power, please pay attention to the heat of the module (chip, inductor, diode) to avoid overheat protection of the chip. The module refers to the official design specification for layout and wiring, generous materials, small ripple, convenient and practical. Suitable for student competition use and personal project development.

Precautions1.Since the working voltage of the EN pin of the chip is –0.3V—8.4V (the chip is enabled when it is greater than 1.2V) and the chip has an internal pull-up current source of 1.2μA, the chip can also work when the EN terminal is left floating; for compatibility Wider input range The module's enable voltage divider is not welded. If you need to modify the undervoltage protection, please configure R3, R6 and R9, R13. For example: R3=300K, R6=47K; when VIN is less than 9V, the partial voltage is less than 1.2V, the positive voltage does not work, the negative voltage is the same, and the undervoltage protection is realized; please refer to the chip manual for more details.2.When the module is used, 100uF or larger electrolytic capacitors can be added to the input and output terminals to improve ripple.3. There is no reverse connection protection for this module, please buyers carefully check and compare the power supply and then power on, otherwise it will damage the module.4.The power supply heating is mainly determined by the input and output voltage difference and the load current, please choose and use the power supply module reasonably, generally need to reserve 30% of the surplus.5.The module is a step-down module. The input voltage needs to be greater than the output of about 2V to stabilize the output.