Item specifics
-
Brand Name
Aideepen
-
Origin
CN(Origin)
-
is_customized
Yes
-
Output Frequency
Pls check description
-
Output Type
Single
-
Output Current
5A
-
Model Number
Switching Power Supply Module
-
Output Power
Pls check description
-
Certification
CE
-
Application:
Computer
-
Type:
Voltage Regulator
-
Supply Voltage:
12V
AC-DC 12V 5A Switching Power Supply Module LCD Display Switch Power Supply Bare Board Monitor Module for Replace/Repair 
Specification:1. Input: 100-240V 50-60Hz2. Output: 12V3. Output Current: 5000mA4. Size: 10.7*5.0*2.4cmPackage Included:1 x Power Supply Board
AC 100V-240V to DC 12V 2.5A Description:
1. Input: 100-240V 50-60H
2. Output: 12V
3. Output Current: 2500MA
Function: Over Voltage/Over Current/Short Circuit Protection
4. Size: 7.7x3.7cm/3.03x1.46inch
Quantity: 1 Pc
Note:
Please allow 1-3mm error due to manual measurement.pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item.Thank you!
AC 100V-240V to DC 12V 1A 1.Input Voltage: 100-240V 50/60HZ
2 Output Voltage: 12V
3.Output current: 1A/1.2A up to 1.4A
4.Size: 6.9*3.3*1.8 cm
5.Overvoltage Protection:Yes
6.Overcurrent protection:Yes
7.Short circuit protection:Yes
AC 100V-240V to DC 5V 2.5A 1.Input Voltage: 100-240V 50/60HZ
2 Output Voltage: 5V
3.Output current:2.5A
5.Overvoltage Protection:Yes
6.Overcurrent protection:Yes
7.Short circuit protection:Yes
AC 100V-240V to DC 5V 2A Description:
1.Input voltage:AC 100V-240V 50-60Hz
2.Output voltage:5V
3.Output current:2A
4.Size:7.2*3.4*2.5cm
5.Overvoltage Protection:Yes
6.Overcurrent protection:Yes
7.Short circuit protection:Yes
AC 55-277V to DC 5V 600mA Input Volatage Range：AC 55-277V；DC 70-390W
No Load Power：<0.05W;max input power:3.5W
Output Voltage;5V;max output voltage range:4.9-5.3V or 4.8-5.2V;
Output Current:0-600mA;output indicator lamp 1mA red light.
Output power:3W;efficiency 80%
Output Protection:overvoltage,overcurrent,overtemperature,overpower,short circuit protection etc.
Applications:for zero line,live line intelligent switch,intelligent socket,equipment and instructions,other controllers etc.
Working temperature:-25~85℃
Installation Way:
Solder the input and output port pin on the PCB as independend components.
Solder the lead wire,and use the glue to fix.
PCB slotting,directly plug it on the PCB to solder.
If it is used in single live line intelligent on-off value,take off the LED and change the starting resistor will be OK;If you want to change 10M resistor into 20M,just remove the LED.
| 
Complementos Moda