Fashion Accessories & Bags- 0Cart
-
Your shopping cart is empty.
-
more items in the cart...
Cart Total: $0.00
Proceed to Checkout
|
Item specifics
Product Description
DC 6V-28V 10A Width Modulation PWM 6V 12V 24V Motor Speed Control short circuit motor blocked overcurrent protection Switch
New arrival Input supply voltage: 6V-28V DC Output current: 8A max (resistance load); 5A max (motor load) Include Power-on LED and current-limit-protected alarm LED Adjustable current limitation, Adjustable protected delay time, and Adjustable reset time. Item size: 32mm*50mm*15mm ; Net Weight: 12 g Features: GZ03 DC Overload Protector used for overcurrent protection, short circuit protection, motor blocked protection, auto-stop overload protection. The input voltage is DC 6V-28V. Output current: 8A max (resistance load); 5A max (motor load) The Protected Delay Time: 0-20s The Current Limitation: 0.2A-10A The Reset Time: 1-600s (automatic mode) Include Power-on LED and current-limit-protected alarm LED. Operating instruction: Before you attempting to wire the protector, make sure power is off. WARNING: DO NOT REVERSE POSITIVE AND NEGATIVE POWER LOADS.THIS WILL DAMAGE THE CONTROLLER. 1. Connect wires refer to the "wiring diagram" (NO. n picture). 2. Install the jumper to “Auto” or “Manual” modes. (Default is automatic mode.) 3. Set parameters of Current Limitation, Delay Time and Reset Time (automatic mode). 4. Turn on the power. Current Limit Adjustment: When the red alarm LED is lighting, eliminate the overcurrent factors, it will automatic reset (automatic mode), or push the Reset Button, reset the power (Manual Mode). Reset the current limitation pot should as follow: 1. Turn off the power. 2. Adjust the Current Limitation pot until the desired maximum current is reached. 3. Reset the power.
Average rating:5 ( 0 reviews )
Write a review
|
