Item specifics
-
Brand Name
YIXINYOU
-
Motor Type
DC Motor
-
Model Number
Brushless ESC drive without Hall
Brushless ESC drive without Hall,
Originally used on brushless angle grinders,
The power is definitely much larger than the electric drill,
It is estimated to drive around 500W,
Internally drive 12 Toshiba TPCA8057 power MOS tubes,
Drive fully sealed glue filling process,
Aluminum alloy shell for heat dissipation,
AISHI high temperature resistant electrolytic capacitor,
The driving workmanship is very good.
The drive can work between 15-26V,
5-6S lithium battery, lightly switch between high and low speed buttons,
You can switch between high and low at will during motor operation,
The measured compatibility of the sensorless drive is also good,
It can be said that it supports most of the high-power type high and low speed brushless motors,
The owner tested the DJI 6010 brushless motor,
1080W inner rotor brushless motor,
Nidec's 600W motor,
8312 disc type brushless,
2312 brushless motor,
The ultra-high speed brushless motor of the vacuum cleaner can be started and operated normally,
Our low-speed low-power type inner rotor 7-shaped deceleration and 51mm diameter low-speed brushless are not acceptable,
It is estimated that the power is too small and the small difference between the coils is too incompatible.
Other types of motors are not tested one by one, and need to be measured by yourself.
Be careful not to overload the brushless drive,
It is recommended not to use motors with too much overload,
So as not to burn the driver,
Pay attention to the driving heat during DIY use,
Output UVW three-phase is strictly prohibited short circuit,
The positive and negative poles of the power input must not be mistaken.
|