The control board is not equipped with overcharge and overdischarge protection. The battery needs a built-in protection board to connect the battery. Charging current <2A. Discharging current <1.5A. Only compatible with 3.2V lithium iron phosphate battery 3.7V lithium battery

The microwave sensor turns bright for 15 seconds and turns to slightly bright. The remote control equipped with this product does not have a battery installed. You need to buy a 7th battery locally for use.

Rated voltage: 3.2V / 3.7V

There is no over-charge and over-discharge protection. The battery needs a protective board

Solar panel input power: <6V

LED power: <1 0W (60w virtual standard on the market)

Induction method: microwave radar induction

Sensing distance: about 5-10 meters

Sensing time: 15 seconds after highlighting, turn to bright

Test considerations

1. When testing induction mode, there should be no moving objects within 12 meters, including hands and feet, otherwise it will be detected

2. Multiple induction modules will interfere with each other when they are together, resulting in insensitive induction, sensitive conditions, or false triggering.

3. The surface of the patch part is the emitting surface, and it cannot be glued or glued, otherwise the sensing distance will be shortened

4. The distance between the front and back of the sensor is no less than 2CM from the metal

5. The surface of the patch parts must not be covered by metal, otherwise the detection signal will not be emitted and the sensing distance will become shorter

6. Induction signal can penetrate glass plastic wall etc.