Description:

• Shaft Locking Buckle Assembly Set Spare Pats For Xiaomi M365 Electric Scooter

Item Specifics:

• Material:Alloy steel, Stainless steel

• Compatible with:Xiaomi M365 Electric Scooter

Features:

• Replacement or upgrading parts for Xiaomi M365 shaft locking.

• Machined with high precision for perfect fitness.

• Controlled opening easy closing, two-stepper closing possible, flexibility of setting, Maximum reduction of mechanical play.

Instructions:

• Unscrew the old lock, keep the screw safe as you are going to use the same one for the replacement part.

• To punch out the pin you need to make sure you do it from the correct side. Make sure you do it from LEFT to RIGHT (when looking from the front of the scooter, not from the steering wheel side). Lay down the scooter, put something solid under the folding mechanism. Make sure to watch out for cables! Move them away before each punch otherwise you are going to break them.

• Apply some lubricant, oil or WD40 to the pin and leave it for a while. Some customers prefer to use hot air tool instead to slightly heat the pin.

• Apply 4mm punch tool and hit it hard multiple times. Once again, watch out for cables. This process can be quite difficult, we personally spent 15 minutes to punch it out while others manage to do it within minutes. 

• Take a new lock and use the same screw to put it back on.Turn the scooter upside down as the pin has to be inserted from the other side (RIGHT TO LEFT when looking from the front of the scooter)

• Make sure to follow the arrow on the pin. Put the pin inside and then apply the punch tool once again. It should go in quite easily. Punch it until its aligned from both sides. 

• Readjust your shaft lock/bolt to make sure the new lock folds in well. Do not over tighten it, but do not make it too loose either (just enough resistance in it and there is no play in the stem/hinge).

• Please note: instead of punching the whole pin out some community members prefer to just cut the metal pin from both sides of the lock and then punch out the remaining bits. You could also try using vice and a bolt if punching out the pin does not work for you. 

• Returns are not accepted for used items when you are not able to replace the lock. Only for items in a same condition and packaging.

Package Included:

• 1 x Shaft Locking Buckle

• 1 x Pull ring screw set

Note:

1. Due to the light and screen difference, the item's color may be slightly different from the pictures.

2. Please allow 0.5-2cm differences due to manual measurement.