MUQZI Tubeless Rim Tape

Specification: 16/18/21/23/25/27/29/31/33/35mm
Material: Outer Ring NOPP Special Tape + Pc Environmental Protection Inner Ring
Size: All Specifications Have a Total Length Of 10m

Features:

It Is Used To Seal The Inner Hole Of The Rim And Maintain The Air-Tightness Of The Tire Under High Pressure. One Roll Can Wrap Two Rims, That Is, One Bike. Just wrap each rim twice

No Glue Residue, Easy To Clean

Used To Seal The Inner Hole Of The Rim To Maintain The Air Tightness Of The Tire Under High Pressure，It Is Recommended To Wrap Each Rim Twice

Super Light And High Pressure

Placed On The Inside Of The Rim, Strong Tensile Strength, High Toughness, High Pressure Resistance
(The Total Length Of One Roll Is Ten Meters For Two Tires)

Strong Fit

Strong Adhesion, Flat And Not Easy To Move, Not Loose, Easy To Install, Strong Practicability

Lightweight And Easy To Clean

Only 0.1mm Thick, Strong Adhesion, Fracture Resistance, Not Easy To Deform And Age,
It Is Not Easy To Fall Off After Long Time Use, Safe And Secure

How To Choose The Correct Width Of The Tire Pad?

Tire Pad Width = This Width Plus 3/4mm

Strong Tensile Performance!

1.Special material
Super toughness and tensile strength
2.Remarks: The tensile resistance of this tire pad far exceeds the weight of a bucket of water

Installation Steps

1. Clean the inner surface of the rim without burrs and dirt
2. The position of the air nozzle hole about 10 cm starts to wrap the tubeless pad to cover

3. Pull harder during the winding process to make the tire pads stick to the inner side of the rim smoothly without air bubbles
4. Cut the tire pad after winding it twice around the rim.

5.6. After installing the tire pad, find the air nozzle hole, and use a sharp object to pierce the tire pad at the tire pad air nozzle hole to install the vacuum nozzle

7. When installing the gas nozzle, press the bottom of the gas nozzle with your thumb, and turn the nut with the other hand until it is locked
8. During installation, try to ensure that the tire lip is in the groove on both sides of the rim, so as to prevent air leakage

9.10 Start to inflate, try to choose a large-capacity high-pressure air gun or pump

11. Fill to the appropriate value according to the tire pressure indicated on the tire
12. Inflation is complete

Frequently Asked Questions:
1. We Deliver Within Two Days After