Geyiren C100 OBD2 HUD Head Up Display

Please note:
1.Please manually turn off the HUD,when you don’t drive your car for more than a week.
2.OBD System Only Compatible With Petrol Car ,Not compatible With Diesel Car Electric Car hybrid vehicle.

Product Introduction：

HUD short for Head Up Display,the main function is to display the car dashboard information (e.g.speed,RPM,water temperature,voltage,trip distance etc ),and keep the driver eyes always on road to avoid the dangerous of lowering down head to read the dashboard.

HUD MAIN FUNCTIONS

Speed alarm/The oil  temperature/Hot oil alarm/Instant voltage/Speed/The mileage

Product Introduction：

1.Multi function : speed,engine RPM,water temperature,voltage,driving distance
2.Fatigue driving , Engine Error
3.Water temperature icon ,voltage icon
4.Light sensor:HUD can automatically adjust the brightness according to the environment
5.MPH=Speed Mile/hour,KM/H=kilometer/hour, MPH=Mile/hour.

Short pull up to switch display mode

mode 1: speed
mode 2: Speed + RPM
mode 3: Speed + Water Temperature
mode 4: Speed+ RPM + Water Temperature

button function:

turn off/turn on
1.Short Press‘<’.
(1)to switch the display mode
(2) to setup menu options
2.Long Press‘<’.
Turn off the buzzer and press for 2 seconds to turn on the buzzer again.
3.Short Press‘M.
OBD system: to switch voltage, water temperature,vehicle speed during OBD system, enter into menu setting to switch menu options or parameter values.
4.Long press‘M’.
to enter into menu settings (see instructions for Menu 1-12) and press 5 seconds to save and exit
5 Short Press‘>’.
Switch speed mode,add menu or parameter after entering setting.
6.Long Press‘>’.
(1)To confirm all of the LED lights can be worked.
(2)To clear engine fault code.

Car Speed Alarm

Clear the fault code

Restore setting:

Unplug the power supply,long press'M' button and hold until all of the LED lights on.

Buyer Shows

EASY INSTALLATION

Easy to install,plug and play

Product Features:

1. Geyiren CAR 100% Brand Guarantee
2. Safty driving, Keep your eyes ahead, No need to down your head to see Dashboard while driving
3.Nano-technology to eliminate double reflections, more clarity
4. Easy to Install, Only need connect the HUD with Car OBD port by OBD cable, HUD will display when car engine on / off
5. Over-time driving Alarm, Low Voltage Alarm, Over-speed Alarm, High temperature Alarm, Engine faulty Alarm6. KMH & MPH Switch Freely.
7. Compatiable for: Cars in OBD II Standard (after 2007 years)（Diesel cars, pure electric cars, hybrid cars cannot be used）
8. Installation position: On Center Console
9. Connection: Connect with Car OBD port
10. Display information: speed, RPM, water temperature, voltage, single driving distance, low voltage alarm, high water temperature alarm, over speed alarm, freely switch between kilometers & miles.
11. Multi-color design makes the screen clearer and easier to read
12. 5-level brightness adjustment, automatic and manual brightness adjustment mode

Incompatible models (will updated...)But you can choose our GPS

HUDChevrolet Niva 2019     Nissan Altima  2017  Jeep Wrangler 2015     Nissan tiida 2011    lada samara  2014/ 2007fortuner 2010KIA RIO Sedan AT  2015     mitsubishi outlander premium  2019    Mitsubishi Pajero 2007     glc 2020Subaru Forester 2010( EU version and TLC Prado 120, EU version)……
Diesel vehicles, hybrid vehicles can only use GPS C100is not compatible