Feature of 45A Sine Wave Controller:

1. Use a sine wave control, the motor torque ripple is minimized to achieve no noise, no vibration, smooth and comfortable of driving vehicle

2. Increase the low speed district of motor torque to meet the high torque requirements of the vehicle during its start-up and climbing, improving climbing performance, zero start-up is available

3. Improve the operating efficiency of the motor; reduce the controller temperature-rise, increasing the vehicle continuous mileage

4. With a multi-protection functions such as the stall, over-current, over-temperature, under-voltage, speed driving, phase shortage, output short circuit etc., so as to protect the vehicle electronic control systems and traffic safety

Notice:

Notice:

1.This Controller work with sensored Brushless DC motor and Kunteng LCD only.

This ebike controller is not suitable for scooters.

2.Work voltage:36V or 48V Universal (support both voltage)

3.Suitable for Brushless Non-gear Hub Motor 1000/1500/2000W

Specifications:

1.Type:KT 45A ebike controller
2.Voltage:DC 36V 48V
3.Rated current:22A
4.Max current:45A
5.Low voltage protection:DC30V/40V
6.Mosfet:18 mosfet DC sine wave controller
7.Size:235*80*40mm

Details:

-Phase cable(3pcs) connect with motor
-Hall sensor wire
-Battery cable(XT60)
-Throttle
-PAS Sensor
-Speed sensor
-Brake connector (2pcs)
-Light connecotr 1(Output power only 3W)
-Light connector 2(Output big,connect battery directly)
-Electric lock
-Display
-Back up
-Cruise

More choice

-45A controller with one KT LCD 3 display
-45A controller with one KT LCD 5 display
-45A controller with one KT LCD 4 display