Description
Customer Reviews(0)

Item specifics

Brand Name aimaao
Origin CN(Origin)
Guiding Line Yes
Alarm Type Accessories
Alarm Type Alarm Systems
Alarm Type Front
Alarm Type Front Side
Alarm Type Rear Side
Alarm Type Remote Starters
Alarm Type Vehicle Backup Cameras
Lens Material Plastic + Glass
Shell Material Plastic
Certification NONE
Wire or Wireless Wire
Wire or Wireless wireless
Material Type Abs
Length of Video Cable 10M
Length of Video Cable 2M
Length of Video Cable 6M
Display Size 4.3 inch
Pixel 756x720
Products Name Car Rear View Camera monitor
Feature Reversing Parking Rear view System
Fits for 12V Car Electrical System

Product Description

The standard configuration:Camera + 6 m video cable (or DVD video cable) + 1.5 m DC power cable + self-tapping silk Features:1. The CCD digital fill light image sensor is specially designed for the rear view of the car. It uses digital fill light and software technology to make the daytime image clear and the night low illumination.2. Large viewing angle of 170°, safer reversing3. -30 ° C to +60 ° C temperature range, fully in line with automotive environment applications.4. With reversing reference line (electronic ruler line), the obstacle distance is clear at a glance5. Digital sensor chip processing, night vision effect is obvious6. Factory tested by high-pressure water immersion test and 12-hour power-on aging test, multi-layer waterproof design, truly high-pressure rinsing and immersion waterproof7. Installed at the rear handle and license plate lights, with self-tapping screws8. The video cable is connected to the monitor, and the power cable is connected to the power supply of the taillight of the car. When the vehicle is reversing, the reversing monitoring system automatically starts working, and the situation behind the car can be clearly seen . Product parameters:Image sensor: PC7070Pixel: 756*720Image format: NTSC/PALDiagonal viewing angle: 170 degreesRated voltage: DC12VProtection level: IP67Display size: 4.3 inchesDisplay format: 16:9 power ≤ 3WPower: DC 6-32VVideo: All the way to reverse the rear view input, all the way to DVD input, rear view priorityVideo input system: PAL/NTSC dual system automatic switchingReverse function: automatic switching between rear view and automatic wake-up function after connecting the cameraThe LCD monitor is small and convenient, the bracket can be moved up and down, and it can be adjusted according to the angle of view required by the customer. It can be made into a car monitor.Video format: NTSCPAL automatic switchingDisplay: 4.3-inch TFT-LCD digital screen Resolution: 480 (H) X 272 (V)Input voltage: DC6-32VSignal input: two video inputs, one way back, one channel can be connected to DVD and other videosSuperhuman design, reversing automatic start, off-line self-power shutdown! Precautions:1. For the microelectronic products of this product, please install, operate and use according to relevant national standards.2. Adapted to 12V automotive electrical systems, can not be installed in 24V electrical models.3. For the continuity between the parts, please connect with the dedicated line provided immediately.4. Care should be taken during installation to prevent flattening, puncture, cutting, and extension of each cable.5. Please install and maintain the system when the power is off.6. Daily maintenance and repairs are carried out by manufacturers or professionals.7. This product is not connected to the car brakes and is only used for parking assistance. If there is a parking accident, the product manufacturer has no obligation to bear legal responsibility. Ultra-easy installation method:1. First wire the cable, red is connected to the positive pole of the power supply, and the negative pole is grounded.2. Install the camera and place the camera in the trunk.3. Plug in the camera and plug in the monitor4. Connect the power supplyEasy to solve all your car installation problems in four easy steps