- 0Carrito
-
Su carrito está vacío.
-
más artículos en el carro...
Carro Total: $0.00
Pasar por caja
Su carrito está vacío.
Carro Total: $0.00
Pasar por caja
|
Item specifics
Product Description
Product Description 1. Connect the input terminal to 5/12/24V DC power (note that the positive and negative poles are not reversed), then the power indicator red light will be on. 2. Connect the output control terminal to a power supply with a maximum voltage of 250V and a maximum current of 10A, and connect it to the load. 3. When the light detection head detects that the light is dimmed, the switch automatically closes, the load works, and the work indicator lights up in blue; when the light is dimmed, the relay is disconnected, the load stops working, and the work indicator turns off. 4. If you feel that the light detection is not sensitive enough, you can use a screwdriver to adjust the potentiometer to achieve the detection sensitivity. Product Parameter Product name: photosensitive relay module Product model: XH-M131 Input voltage: DC 5V/12V/24V (Optional) Output type: output switch Control capacity: Max 10A Detection frequency: 1MHz Product size: 53*31*19mm
|