product description

Notes:
This remote control only supports the receiver learning code (1527) Compatible with remote control using the following chips: PT1527, EV1527, SCT527, HS1527, SCL1527, FP1527, EV1527


It is a panel 86 wall transmitter and handheld remote universal and can be snapped anywhere. It is a learning code transmitter EV1527 IC chip. It can be learned by most learn code receivers and will work with any type of learn code receiver in our store. Thereby successfully avoiding the trouble caused by routing.

Wall Plate Transmitter Specifications:
Operating frequency: 433MHz.
Battery type: Panel transmitter 12V27#7# battery. Handheld; 23A battery 12V alkaline battery
material: plastic.
Encoding Specification: 1527.
Distance: Indoor (10m/33ft), Outdoor (15m/49ft).
Panel Emitter (/W/H): 86mm L x 86mm x 13mm.
Weight: 120 grams

product learning method

1. Press and hold the main switch for 2 seconds to hear a 'di', touch the panel transmitter button, the main switch once again 'di' to indicate successful pairing
2. Clear the code, press and hold the main switch for 8 seconds, hear the sound of 'di' until there is no sound

Show picture of RF433 remote main switch
1. Operation scenario of pairing signal between RF433 controller and remote switch
2. There is a blue indicator light when operating between the RF433 controller and the remote switch, and there is no indicator light when there is no operation

Product size chart

Panel Type Transmitter Installation Dimensions
The product does not ship with batteries

Product Description

Need to install 12V 27A AAA battery
It can be paired with products with 1527 protocol, but cannot be used with button switches

Product use

Product pairing can correspond to the switch and the separate key separately
Products can send signals one-to-one
Mutual signal does not interfere
Signal frequency 433Mhz

Installation example

1. After the remote switch is installed, the RF433 controller can be placed anywhere to operate at will
Remote switch and touch screen display behind the remote control
2. Convenient
1. The display diagram of the operation process of the RF433 remote controller

433 RF Strong signal

No need for home WIFI, 433RF own frequency, distance can reach 10-15M

Before and after installation comparison

1. Demonstration of installing button switch, need to install more lines

2. There is no need for more wiring after the installation of RF433 controller and remote switch

One controls multiple, multiple controls one

1, 1 remote controller can remotely operate 3 1-way remote main switches

2, 3 remote controllers can remotely operate a 3-way remote main switch

Remote control switch with touch mode

Super tactile feel like the buttons on a mobile phone