especificación	All accessories Groovemount Piezo Z-probe Screwmount

Descripción
Comentarios de clientes(0)

Item specifics

Brand Name Trianglelab
Origin CN(Origin)
Item Type Auto Self-Leveling Sensor

Product Description

Reference guide:https://drive.google.com/drive/folders/1X2BCPQ6TTaV4uir_ECnJtm8xwmhXUAvu

This product is a Z-probe sensor kit using piezo electric bimorphs technology to provide precision auto bed levering on 3D printers.Of all the other sensing technologies being used in 3D printing we believe this one is the best at present.Nozzle contact is a direct measurement, the nozzle is the 'sharp end of the tool'.Since there are no x and y offsets(and very minimal z-offset) the whole of the printable area of the bed can be probed.It is permanently mounted so no servos to setup,and no issues with repeatability between probings.Any type of tilt in the carriage or effector does not result in probing errors being fed into computations for bed levelling or calibration.WIKI:http://reprap.org/wiki/Piezo-electric_sensors

It is very precise to 0.01mm accuracy(hotend mount)
Very repeatable-standard deviation in testing 0.007mm
Can be used with any printing surface including Printbite,PEI,Buildtak,Glass, Aluminium,FR4
Uses a standard endstop connector
Is permanently fixed,no servos,no deploying required
Easy to configure in your firmware
No X or Y offsets,your nozzle is the tool head,so use the nozzle to probe
Replaces inductive probes,IR probes,Capacitative probes,FSR's,servo probes
Illuminates on probing OR you can specify a solid colour unit both units have LED's front and back
Full STL's provided,Open Source Hardware
The kit is contains all the electronic components both for hotend piezo and underbed piezo setup
Low cost and easy to use

V2.75 Piezo Sensors manual downloadhttps://drive.google.com/drive/folders/1X2BCPQ6TTaV4uir_ECnJtm8xwmhXUAvuSTL files for hotend mountinghttps://www.thingiverse.com/thing:2319993Underbed Piezo Sensor setup manual download

If you want Printed Parts for a Piezo 20 Module clickhere

https://www.youtube.com/watch?v=WDHU3tRU-C4

A tunable PCB for connecting the piezo disc/s and providing an endstop-style signal.Endstop Cables 1*20CMExtension Wires 2*100CM(RED*1 BLACK*1)Piezo Connectors 3*20CM20MM Piezo Discs with punched hole 2pcs27MM Piezo Discs 3pcs35MM Piezo Discs 3pcsHeat Shrink Tube some

Piezo Z-probe=17.8$