Item specifics
-
Motor Type
Stepper Motor
-
Origin
CN(Origin)
-
Model Number
2-/4-phase Driver Stepper Motor Speed Controller
-
Power Supply
DC
-
Certification
RoHS
-
Drive motor
2-phase 4-wire or 4-phase 5-wire
-
Driver Voltage
DC 5V -12V
-
Model
Multi-function Micro Stepper Motor Driver
-
Type
Motor Speed Controller
Specification:
Basic parameters:
[Voltage Range] DC5V-12V
[Rated Current] ≤ 800mA
[Power reverse connection protection] yes
[Overcurrent protection] yes
[overheat protection] yes
Working mode:
[1] Working mode 1: S1 start stop button, S2 forward and reverse button, W2 potentiometer speed control. If limit reversal is required, two limit switches can be connected to the P3 pin, and the motor motion shaft is mounted with contacts, so that the motor will reciprocate within the stroke between the two limit switches.
[2] Working mode 2: S1 forwards the start button, S2 reverses the start button, press any button to stop. W2 potentiometer speed regulation. If the limit stop is required, two limit switches can be connected to the P3 pin, so that the motor will stop moving when it touches the limit switch, and the motor will reverse after the opposite button is clicked.
[3] Working mode 3 (Jog mode): S1 presses the forward rotation, releases the stop, S2 presses the reverse rotation, releases the stop, and the W2 potentiometer adjusts the speed. If a limit stop is required, the upper limit switch can be connected to P3.
[4] Working mode 4 (Automatic round-trip mode): S1 starts and stops, S2 is reversed, W2 potentiometer speeds, and W1 potentiometer adjusts the automatic round-trip steps. After starting, the motor automatically runs back and forth within the number of steps adjusted by W1.
Package include:
Driver Board x 1pcs |
Complementos Moda