NOTE

1. The capacitor must be connected with L and N of the lamp of L1 tightly, not behind the switch.

WARM REMINDER

Don't lid on the glass panel when the switch is in electrical.

The glass panel was lid on when it is in electrical. then the switch will not work

please Restart the main electric switch in your home. it will work

2. Solutions to the problem of insensitive touch

Problem: The switch base is screwed too deeply and tightly, causing a gap between the backlight board and the panel.

Solution: Don't screw the lock screw too deep, if you can't reach it, you can replace it with a longer screw; or fill something between the switch and the bottom box. For touch-sensitive situations, as long as you pay a little attention during installation, it usually rarely happens.

Reminder:

1.This wall switch does not have 433MHZ. Can not be paired with the wireless switch panel.

2. The switching power is 3~300W. If the power of the bulb more than 300W, please do not use this switch. If the power of the bulb is less than 3W, please be sure to install a capacitor, otherwise it will not work properly.

Our advantage:

*1/2/3 switches have their own unique distinctions, so that you don't turn on/off the wrong lights.

*With red and blue LED indicators, it will not be dazzling in the dark and will not be very bright (bring you a very comfortable feeling) red on, blue off

*Single live wire control, easy to install, directly replace the old switch

*Toughened glass to prevent scratches on knives or hard objects.

*Applicable to: incandescent bulbs, fluorescent lamps, energy-saving lamps, LED lamps (power lamps above 3W)

* Tempered glass, easy to clean. Does not fade, looks like new

*Can be touched with wet hands

*Fireproof, strengthen the protection against short circuit of power cord

*Protection against overcurrent and anti-interference.

*After the power is turned off, the switch remains off