Description:

SKWoptics1.25-5X26 BDC-01-M855-3 as one of the carbine optical sights series, is specially designed for kind of AR rifles(M4 RIFLE). The design of the pattern on reticle adopts the parameters of M855 5.56NATO bullets(5.56X45).

At 5 x, different standard short lines ensure that the distance from 100 meters to 700 meters is accurately aimed.

At 1.25 x, there is an inverted V sighting mark, which can be used for quick shooting.

SKWoptics 1.25-5x26 scopes provide wide fields of view, extreme precision at longer ranges and a bright, clear view even at dusk.

This Scopes are engineered specifically for use with tactical style fire arms. These scopes are built tough to handle the most demanding tasks that one faces in tactical situations. Designed specifically for rapid target acquisition, instinctive and accurate action with tactial red dot. Scope rings included

Additional features include 1/2 MOA click adjustments, long eye relief, waterproof, fogproof,

shockproof, multi-coated lens .

Features:

Light weight and compact

Wide fields of view

AR15 M4 M16 M855 5.56X45 bullet Tactical reticle

It can be used from .17-.308 caliber,especially working good with AR/M4/AK

Illuminated reticle allows you to see your target clearly in low-light conditions

One-piece high grade aluminum tube

Diopter Adjustment

Easy Focusing Knob

Nitrogen Filled,100%waterproof and fogproof

Specification:

Patterns on reticle Description:

The image below

The red lines area, when the light is turned on, the lines change from black to red.

There is a circle and a dot. (no matter at any magnification); when it is 1.25x, it has the marking function of aiming, which is convenient for rapid short-range aiming.

The small dots also correspond to targets of 100 meters.

The other short horizontal lines below the small circle represent the shoulder width of the enemy at different distances, which can quickly estimate the distance between the enemy and the shooter.

The image below :

The right side of the vertical line is "METER" area, and the left side of the vertical line is "MOA" area.

In 200 meters, 300 meters, 400 meters, 500 meters, 600 meters, 700 meters, these 6 different distance points, the corresponding impact point we marked out with 6 short horizontal lines.

These short horizontal lines represent the aiming points of these distances.

Please note that the length of each of these short horizontal lines is different.

Because at the same time, the width of the line represents the shoulder width of an adult male at this distance.

On the left side of the vertical line is the corresponding MOA value. Convenient and M4(AR15) trajectory table for comparison and correction.

The pattern on reticle corresponds to the M4 with M855 bullet standard 5.56 NATO.

Velocity 2900fps(945M)

Bullet mass: 62g

Temp: 59f

Altitude: 0

Angle: 3 Deg

Presure: 29.9

Humidity: 0 RH

Height above bore:2.755": 2.75 (2.8w/program)

Optic center line above rail:1.53'

Referance Ammunition:

Standard 5.56NATO - M4 with M855

Description:

A Light offset flat top mount to install magnified optics scope for easier eye relief setup. Very helpful when mounting a scope with longer eyepiece tube, especially ones with illuminated reticles.

Ring Size: 30mm-25.4 

Centerline Height – 38mm

Machined from extruded aluminum alloy 6061

Hard anodized black matte finish

Clamp attachment – two hex nuts with holes

Height from top of rail to bottom of cradle: 0″

Overall height 2.40″ 

Overall length 5.8″ 

Inner space between the rings 82mm (3.2 inch)

Ring width: 24mm(0.95inch)

Recoil lug: 2 square shafts

Mount weight: 8.5oz.

Features:

Machined from aircraft grade aluminum alloy

Offset design for better eye relief position

Fits both 30mm and 1inch main tube scopes

Extra ring top with accessory rail

Specifications:

Packaging details:

A SKWoptics 1.25-5x26 Rifle Scope;

a pair of lens cap;

a piece of lens cloth.

a piece of one piece flat offset mount

a piece of water level ring

How to use the turret?

1. Take off the lid and you can see the turret.

2. Turn the turret with your finger, observe the target through a telescope, and adjust the RETICLE until the crossing point coincides with the bullet strike point.

3. At the top of the turret, there is a dashboard with different scales and different numbers. Please note that there is a slot on the dashboard.

The function of this slot is to return to zero twice.

When we have completed the second step, we use a screwdriver or fingernail to turn the dashboard to the location of the marking point.

                                                      About SKWoptics

         SKW Optical Technology (Shenzhen) Co., Ltd. It is located in Shenzhen, China. it is a manufacturer of high quality optical equipment for both military and civilian use.