Application environment:

Remote control switch, motorcycles, automobile anti-theft products, home security products, electric doors, shutter doors, windows, remote control socket, remote control LED, remote audio remote control electric doors, garage door remote control, remote control retractable doors, remote volume gate, pan doors, remote control door opener, door closing device control system, remote control curtains, alarm host, alarm, remote control motorcycle remote control electric cars, remote control MP3.

Specifications:

Working Voltage: DC 3.6V~24V.
Maximum Load: 2A.
Static Current: <5 mA.
Working Frequency: 433MHz.
Reception Sensitivity: <-108dBm.
Learning Style: Learning Button.
Modulation Mode: ASK (Superheterodyne).
Number of Stored Remote Controls: ≤ 10.
Working Temperature: -20 degrees 80 degrees.
Working Mode: Momentary, Toggle, Latching.
Size: 25.5mm x 13mm x 5mm (length × width × high).

Package List:

1Pcs * DC 3.6-24V Light Switch Receiver Module.

Clear the code:

Press the learning button on the module 8 times continuously, and the light flashes seven times and then goes out.

About working mode:

Momentary: Press the remote button, the relay connects, release the remote button, the relay disconnects.
Toggle: Press once the remote button, the relay connects, press the remote button twice, the relay disconnects.
Latching: Press the remote button A, the relay connects, press the remote button B, the relay disconnect.
Time Delay Mode: Push the remote control button, the relay connects, from when release the remote button, after 5s or 10s or 15s, the relay disconnect automatically.

Learning the code: (Momentary)

Press the learning key on the receiver once time, it comes into momentary setting mode.
Wait for a moment, the LED will be off, it comes into learning state.
Push the remote button, LED indicator on the receiver board will flash then come off.
After 3 seconds, the LED indicator will be on again, learning successfully.

Learning the code: (Toggle)

Press the learning key on the receiver twice time, it comes into toggle setting mode.
Wait for a moment, the LED will be off, it comes into learning state.
Press the remote button, LED indicator on the receiver board will flash then come off.
After 3 seconds, the LED indicator will be on again, learning successfully.

Learning the code: (Latching)

Note: When you choose for latching mode, in order to learn more remote control, you need to learn two different button, the first time learning is for ON, the second time learning for OFF.
For example: Button A = ON, Button B = OFF.
Press the learning key on the receiver triple time, it comes into latching mode.
Wait for a moment, the LED indicator on the receiver board will flash then come off.
Press the remote button A, LED flash for 5 times.
Press the remote button B, LED flash for 5 times.
After 3 seconds, the LED indicator will be on again, learning successfully.
A = ON, B = OFF.

Learning the code: (Time delay mode)

Push the learning key on the receiver forth time, the time dealy for 5 seconds.
Push the learning key on the receiver fifth time, the time delay for 10 seconds.
Push the learning key on the receiver sixth time, the time delay for 15 seconds.
The LED indicator will be off.
Push the remote button, LED flashes and off.
After 3 seconds, the LED indicator will be on again, learning successfully.

NOTE:

1. The system can store for 10 pcs of remotes, if the remote get more than 10 pcs, the initial remote control will be lost.
2. When you receive our products, it may set in one remote mode randomly, that because each product was tested before it can be arranged to shipment. So, please delete the existing data to first use.
3. After deleted the data, all the remote controls cannot work any more.

*If you do not understand clearly. Please send us a message to let us know. We will do our best to serve each of our customers. Enjoy your shopping!*