Length	20m

Descripción
Comentarios de clientes(0)

Item specifics

Brand Name AIKELEYISI
Origin CN(Origin)
Insulation Material Rubber
is_customized Yes
Conductor Material Carbon fiber
Conductor Type Stranded
Type Insulated
Certification NONE
Model Number TXLP-IR
Application Heating
Core size 12K
Resistance 33 Ohm/m
Diameter 3mm
Limited temperature 200C
Voltage 7-300 V

Product Description

Red Silicone Rubber Far Infrared Warm Floor Room Thermostat Carbon Fiber Heating Cable

Product Details:

Product Name: Carbon fiber heating wireTechnical data:1.Carbon Fiber Specification:12K2.Rated temperature: 200 celsius degree3.Conductor:Carbon Fiber4.Insulation:Silicone rubber5.Diameter: 3±0.2 MM6. Infrared wavelength: 8UM-18UM7.Conductor resistance: 33±10% Ω / M8.Properties:High and low temperature resistant,alkali-resisting,flame resistant,anti-aging,weather ability,mildew proof and good flexibility,electrical insulation,and ,have far infared function9.Application:12k heating cable carbon fiber can be used for the fridge defrosting, electric heating blanket,floor heating,towel warmer, massage products,medical appliance, beauty equipments and etc.How to calculate power：Voltage*Voltage÷resistance=electric power12K=33ohm/meterFor instance：220V*220V÷（10meters*33Ω）=150WFor instance：220V*220V÷（15meters*33Ω）=100WSO：The longer the length, the smaller the power,the lower the temperature.12K use range from 10 m to 25 m each section.Precautions:The heating wire can not overlap when used! Can not cross!Cross-over will make the heating line local temperature higher than the melting point of the protective layer, will damage the heating wire!The heat shrink sleeves and copper tube is included in the package.10m wire, included 2 pcs sleeves + 2 copper tubes;20m wire, included 4 pcs sleeves + 4 copper tubes;30m wire, included 6 pcs sleeves + 6 copper tubes;50m wire, included 10 pcs sleeves + 10 copper tubes;

Heating Cable Connection Method:

Heating CableInstallation Suggestions:

For underfloor heating, It is better to use ten meters of cable per piece and connect all the pieces in parallel connections. Keep the distance between the cables at 8 -12cm.