Fashion Accessories & Bags- 0Cart
-
Your shopping cart is empty.
-
more items in the cart...
Cart Total: $0.00
Proceed to Checkout
|
Item specifics
Product Description
1）Material：Acrylic & Aluminum 2）Body color：Matte White & Matte Black 3）Input voltage：AC110-220V 4）Light source：Warm white/Cool white--2835 LED chip（with driver）； 5）Color temperature：(Warm White)2700-3200K， (Cold White)5500-6500K 6）Source life：> 50,000 hours 7）Size：Length：24cm ；Length：30cm ；Length：40cm ；Length：50cm ；Length：60cm 8）Power： Length：25cm —— 8W Length：30cm —— 11W Length：40cm —— 15W Length：50cm —— 19W Length：60cm —— 23W Phone Control the number of wall lamp：10 pcsNOTE： Because the RGB APP control is colored, when it is on, only one-third of the lamp beads are actually activated, so that the color effect can be achieved. Therefore, the actual power is the total wattage divided by 3, but the total power is correct. However, when using machine testing, it will be found that, for example, if the total power is 23W, the actual power is 23W÷3=7.66W. --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 1. How to setup your Bluetooth light? Answer:Enable your Bluetooth on your phone. Then power on the light via switch. Open current app and add the bluetooth light within one minute, enjoy Note: 1) Do not install bulb with dimmer switch or 3-way lamp. 2) Bluetooth smart lights does not require a PIN to connect to. Do not pair the smart light under Bluetooth settings. 2. Which types of equipments are supported by current Application? Answer: Any IOS device(must be with bluetooth 4.0 or later version) can work with this application,such as Iphone 4s,5,5c,5s,Ipad3,4,Ipad air,itouch,ipad mini etc Android 4.3 or later version, and must have Bluetooth or later version. 3. How far can I control bluetooth led device from my phone? Answer: Normally,the range is 18-30 meters without obstructions.when you control Bluetooth led device through obstructions, the bluetooth signal will be not that strong. 4. How many led devices can I control at same time? Answer: You can control bluetooth led device from App maximum 4pcs at same time,You can also set many Groups like Room1,Room2....Room7...., You can add to each Group maximum 4pcs bluetooth led devices,you can control these group together or seperately. 5. Why the time function do not work? Answer: The time function will not work if you switch off the led device, Such as you turn off the led device electricity switch or electricity failure. Please reset! 6. How can I do if connecting the Bluetooth device or adding new device failed? Answer: Please power off the LED bluetooth device,then turn it on again,if the problem can't solve,please restart the phone. 7. My phone keeps disconnection from the smart light Answer: If you are noticing connectivity issues with the Bluetooth smart light, its likely due to one or more of the following: The light is placed in a recessed or enclosed light fixture that interferes with the Bluetooth signal and reduces air circulation. The bulb is placed in a metal light fixture that interferes with the Bluetooth signal. Your phone is too far from the light. Make sure your bulb is placed in an open light fixture that does not cause interference with the Bluetooth signal. 8. I am being asked for a PIN when connecting to the light Answer: Bluetooth smart lights does not require a PIN to connect to. If you are being asked for a PIN, Do not pair the light under Bluetooth settings, The Bluetooth light requires the app to connect to and control the light. Simply open the app and click on 'Add Device' for the lights that show up. 9. Why can't scan out the Bluetooth led device? Answer: Double check the Bluetooth led device's power is on or not. Metal can shield the Bluetooth signal,If you install the Bluetooth led device to a metal lanterns,the blueototh led device maybe will not come out form the APP. For a Bluetooth led device, only one phone can control it at a time,do not use more phone to control it at same time. 10. Why do we need location permission and location services? Answer: There is one new permission request regarding Location Services. It is only for Android 6.0 + and it is new requirement from Google for all Bluetooth apps. If you do not use Android 6.0 + then there is no need to turn it on. The other permission requests remain the same as they are specific to functionality: - Camera - use your mobile devices camera option to capture specific colors - Microphone - allows the light to move with the tone of your voice, music, etc... - Photos/Media/Files - allows you to save the colors from a specific scene in your Photos/Media/Files - Location Services - a new requirement from Google on ALL Bluetooth apps for Android 6.0+ 
Average rating:5 ( 0 reviews )
Write a review
|
