PCIe NVMe X1 Card

Feature:
1. The adapter card uses differential line alignment to support PCI-E 3.0 1X signal.
2. Support for Samsung PM961, 960EVO, SM961, PM951, sm951, INTEL 600P, LITE-ON T10 NVME protocol M.2.
3. The M.2 of the SATA protocol is not supported.
4. The standard version supports 2230,2242,2260,2280 of NVME M.2.

Warm Tips:
1. M.2 NGFF to PCI-E 1x transfer card, the use of this adapter can turn the common PCI-E 4X interface to the M.2 NGFF interface.
2. There are 4 fixed holes on the board, 22*32 mm, 22*42 mm, 22*60 mm, and 22*80 mm, respectively.

Note:
Please allow slight size differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understand.

1. PCIE 1X 4X supports all PCI-E standard M2.SSD, does not support old-style SATA M2.SSD The important thing is to say it again, does not support SATA M2 SSD.

2. Only when UEFI BIOS is flashed to the version, old-fashioned BIOS can only be used as a storage disk, not a system disk

3. PCI-E 1X 4X and above sockets (note that the speed of 1X interface PCI-E 3.0 and above will be halved, but it will still be faster than SATA)

4. For WIN10 system, WIN7 system must install SSD driver

Plesae do format and partition when you use SSD for the adapter(Right click"My computer- Management-Storage- Disk Management)