Fashion Accessories & Bags- 0Cart
-
Your shopping cart is empty.
-
more items in the cart...
Cart Total: $0.00
Proceed to Checkout
|
Item specifics
Product Description
material: metal Colour: Black Support Interface: USB3.0 TO SATA 22PIN Support System: WinXP/Vista/Win7/Win8 32-bit/64-bit LINUX Meets Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0 Compliant with PCI-Express v2.0 specification, backward compatible with PCI-Express v1.0. Supports communication speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i. Supports two SATA Support AHCI1.0 mode and IDE mode Support native command queue (NCQ) Supports FIS based on port multiplier switches or command switches. Hot-swappable and hot-swappable. Compatible with SATA6G, 3G and 1.5G Hard Drives Bus interface PCI-Express x1 slot Extension ports 2 SATA3.0 interfaces System Requirements One available PCI Express X1 slot, supporting PCI-E X2 X4 X8 X16 Operating System: Windows 10/8/7 (32/64 bit) / Vista (32/64 bit) / XP/2003/2008/linux System disk and PCIE to SATA3.0 adapter card connection conditions and solutions: 1, PCIE to SATA3.0 SATA interface mode is AHCI mode, if you want to insert the system disk in our card, the premise is that your system disk installed on the motoard must be AHCI mode installation, otherwise it can not pass Our card adapter card boot system. 2. If it is determined that the system disk is inserted in the AHCI mode of the SATA interface mounting system on the mainboard, then the hard disk can be directly inserted into our card, and then the mainboard BIOS is set to start the system disk as the first boot. 3, the above two conditions are available, if you still can not start, or repeatedly restart, then the motoard hard drive interface and our adapter card conflict, the solution is to enter the motoard BIOS, the motoard's hard disk interface options set to Disabled, save and restart to boot the system Attention: Don't Support as System
|
