Color	used and burn shadow
used and burn shadow

Descripción
Comentarios de clientes(0)

Item specifics

Brand Name jiansu
Origin Mainland China
Material OLED
Model Number pixel 3A/3AXL
Type LCD & Touch Screen Digitizer
Certification None
Screen > 3

Product Description

For Google Pixel 3A LCD Display Touch Digitizer Screen For Pixel 3A Used And Burn Shadow Replacement+glues

Note: The screen is the original used screen with shadows and scrath,but it does not affect the touch function, so it is cheap. If you mind burning shadows, don't order. As a shadow, we reject debate and feedback. If you want A quality,my shop also have .Thank you buyer.

A few tips for intallation

1.Make sure your phone is power off first before installation.

2.Prepare a heat gun, or a hair dryer and heat up the edge of the phone before you begin slicing.

3.Mark each screw. Your screen might be broken if you put the screw in a wrong hole.

4.Use tweezers and spudger to remove sticker or display cable bracket.

5.Be careful with metal tools to avoid scratching the screen.

6.If your phone won't turn on after replacing the screen, there is a chance that the phone has silently turned on when the battery is re-connected. Hold the power button for a few seconds until the phone vibrates off. Afterwards, re-connect the screen, and try again.

Description:

*Replacement part LCD Display For Pixel 3A*All parts are 100% Tested*Replace for your broken, damaged, faulty, unusable mobile phone parts*Versions : With Frame .*Please choose the correct Color and Option.Attention:Please remember that test your product before you install it. If not, it will be difficult to judge the responsibility if the LCD is damaged. so once the LCD have been installed , any damage to man-made causes, we will not take any responsibility.If there is any problem, please send me a video, which shows the front and back side of the product and the process of testing