Real Shot Product Picture:

Product Features:

Accord with RoHS and REACH environmental protection requirements. High thermal conductivity, high insulation, high temperature resistant, low oil separation, non-corrosive.

Working Principle:

Filling the gap between heating element and the cooling device; increasing the contact area so as to achieve the soundest thermal conductivity effect.

Method of Use:

It is normal phenomena if there is little silicone oil floating above. Please stir well before use. Keep the coated surface clean and apply directly with tools (such as scraper, finger cot, etc).

Warm Notice:

Please keep children away from it to avoid eating by accident. If it is swallowed or inadvertently comes into eyes, ears, nose, mouth, please flush immediately with plenty of clear water or send to hospital when necessary.

Storage:

Preservation at normal temperature. Please cover it after used, avoiding impurities such as dust, that have a bad effect on thermal conductivity.

Smearing Steps:

1. Please clean the surfaces of heat source (CPU) and dissipate heat device (heat sink) with dry tissues.

2. Using scraper or other tools to smear the thermal paste onto the CPU, and it is no need to smear on heat sink.

3. The thermal paste should be smeared evenly on the whole CPU surface. It can neither too thin, the printed words on it should be covered. Nor too thick, the thickness like A4 paper will be better. Please refer to the following pictures.

Shipment:

1. All the orders will be shipped by air, and we provide free tracking number. Tracking and tracing your parcel online for the whole course till it is delivered. Enjoy much safer and faster shopping experience here.

2. In three working days, your order parcel will be sent out after verified