Spec.	Button Button no battery wheel Wheel no battery

Description
Customer Reviews(0)

Item specifics

Brand Name DEEPELEC
Battery Capacity(mAh) 5000
Origin CN(Origin)
Is_Display Yes
Waterproof / Water-Resistant No
Walkie Talkie Type Portable
Maximum Range <1.5km
Output Power(w) <0.5w
Certification CE
Model Number NanoVNA-F
Frequency Range 10k~1.5GHz
Dimensions 14x7x2cm
Material Metal

Product Description

2022 New Version Recommendation, Please Click.https://www.officematics.com/item/1005004079129639.htmlLatest firmware 1.0.2 released ! visit: deepelec.com

Support 301 sweep points at most(unit side), improve the sweep speed, about 101 points per second;
Support setting arbitrary scanning points by using nanovna-Saver;
Simplified Chinese and traditional Chinese can be set;
Support LC / match impedance matching function;
Support bandwidth setting;
The number of calibration slot is increased to 7, and the unit frequency information can be displayed;
Support up to two ordinate axis display;
Support NanoVNA-App;
Add a button to clear all configurations;

This firmware does not apply to NanoVNA-F V2, NanoVNA-F and NanoVNA-F V2 are two independent products.

Important hint !

This firmware is only applicable to NanoVNA-F machines manufactured by BH5HNU.

Any third-party NanoVNA-F hardware has not been tested, and any problems with third-party hardware using this firmware will not be explained by BH5HNU. Thank you for your cooperation.

Brand new black EVA packaging, customized 4.3 inch screen protector.


NanoVNA-F Hardware Release Notes www.deepelec.com
Hardware version	V2.2 PCB with "by BH5HNU" mark	V2.3 PCB with "by BH5HNU" mark	V3.1 PCB with "by BH5HNU" mark
Release date	2019.09	2020.03	2020.03
Firmware compatibility	Compatible with latest firmware	Compatible with latest firmware	Compatible with latest firmware
Characteristic	1. thumbwheel switch 2. RF bridge -13dBm output (Fundamental frequency)	1. thumbwheel switch 2. optimized RF bridge 0dBm output (Fundamental frequency), more accurate reflection measurement. 3. lower standby power consumption	1. push-button switch & larger power switch, better operation 2. optimized RF bridge 0dBm output (Fundamental frequency), more accurate reflection measurement. 3. lower standby power consumption 4. USB-A is used as a CAN interface, and iPhone charging is no longer supported
	Sold out	Normal supply	Normal supply
Any other version is not produced by us, please be careful to identify. Deepelec.com

Thumbwheel Version	Push-button Version

The new hardware increases the measured output power, and there is still a good dynamic when the frequency reaches 1.5GHz. The actual measurement is shown in the figure.PORT1 is connected to the matched load:

Measuring 20dB attenuator:

Latest firmware 0.2.0 beta, visit: deepelec.com/2020/07/14/nanovna-f-0_2_0_beta/#### Firmware v0.2.0 beta update instructions:1. Add data storage function, can save s1p, s2p files to SPI Flash in real time, which is convenient for offline analysis;2. Adapt NanoVNA-Saver screenshot function, need to use [nanovna-saver-0.3.4-bh5hnu.exe] compiled by BH5HNU; https://groups.io/g/nanovna-f/files/PC%20Software3. Support LCD backlight adjustment, adjustment range 1-100, default 75;4. Revise the voltage display as the power display, support 8-level power display;5. The calibration data interpolation uses the latest saved data instead of the default position of 0, which is more in line with operating habits;6. Some UI optimizations such as Marker;7. The maximum settable frequency can be expanded to 2.7GHz;8. Two different sets of gain tables are used for hardware V2.2 and hardware V2.3&V3.1, please be sure to select the corresponding firmware to upgrade, please consult your seller for how to check the hardware version;Important hint !This firmware is only applicable to NanoVNA-F machines manufactured by BH5HNU. Any third-party NanoVNA-F hardware has not been tested, and any problems with third-party hardware using this firmware will not be explained by BH5HNU. Thank you for your cooperation.

Add data storage function, can save s1p, s2p files to SPI Flash in real time, you can view the file list on the device, or you can use the PC to operate the file through the virtual disk.

Latest 0.1.1 firmware, visit: deepelec.com/2020/02/02/nanovna-f-0_1_0/1. Add TDR feature2. Add marker tracking feature & dynamic update of frequency and other information when the mark moves3. Add ordinate display4. Support to 10kHz~1.5GHz frequency5. Some font, color, and layout optimizations6. suggestions from groups.io/nanovna-f & facebook group members and much more, thank you for your feedback(1) a beep to the end of each standard measurement in calibration(2) callsign.txt expanded to more chars, not limited to call sign display, can display your phone and email address, etc.