Color	Black white
Black white
Voltage	110V -240V 12V

Item specifics

Item Type Switches
Brand Name MJJCLED
Certification CCC
Certification ce
Certification EMC
Certification ROHS
Warranty 2 Years
Switch Type Proximity Switch
Model Number MJJC-PIR-9
Features Motion Sensor 220V
Material Plastic
Current 3A
Voltage 12V 110V-240V
Detecting Distance 2-12M
Feature 1 IP65 Outdoor PIR Sensor
Feature 2 12V PIR Sensor
Feature 3 PIR Sensor 220V
Feature 5 Motion Sensor 220V
Feature 6 PIR Sensor Switch 12V
Max Load 100W
Feature 7 Infrared Light Switch
Color Black or White
Type 1 movement light sensor
Type 2 motion detector switch 220v
Type 3 movement sensor
Type 4 12v pir switch outdoor

Motion Sensor 220V 12V Motion Detector Sensor Timer 110V Automatic Infrared PIR Sensor 220V Outdoor Movement Sensor Light Switch

1. Easy to install.
2. Automatic, convenient, safe and practical.
3. It has the function of power and detection indication.
4. The motion sensor can identify day and night automatically.
5. It has wide detection range made up of up and down, left and right service field.
6. This product is a new type of energy-saving lighting switch,it adopts high sensitivity detector, integrate circuit and SMT.
7. It utilizes human motion infrared rays as control signal sources,when one enters the detection field, it will start the controlled load at once.

Specification:

Power Consumption :12V ,110V-240V
Time Adjustment :Min 10±3 seconds Max15±2 minutes
Detection Range :180°
Installing Height :1.8m-2.8m
Detecting Distance :2-12m
Time Delay :10s-6mins
Ambient Light :2-2000LUX(Adjustable)
Max load : 150W LED Lamp

1. Turn off the power.
2. Removing the transparent vinyl cover what is in the bottom of the sensor.
3. Loosing the screws in the connection terminal, connecting the power and rated load to connection terminal of sensor according to connection sketch map.
4. Tighten the screws; put the transparent vinyl cover into the the original station.
5. Folding the metal spring of the sensor to upwards, until they are in "I" position with sensor, then put the sensor into the hole or installation boa what is in the ceiling, the size is similar with item. Releasing the spring, the sensor will be set in this installation position.

For 220v motion sensor, you just provide 220V voltage to sensor,dont need the driver.

Only 12V DC motion sensor need a 220V AC to 12V DC Driver or we said power supply or power adapter.

NOTE:
The item can be less sensitive if you go forward the detector,
but it can be sensitive if you go down the for cross section.
If the person stop moving under the motion sensor, it can't light on also.
When it is very hot in summer, then temperature of environment is nearly the same as people, it may not detect well.