Product Description

Small electric push rod
Size: diameter size 8mm
Stroke: 30mm and 45mm two specifications
Material: The outer wall is made of 304 stainless steel precision tube, and the upper and lower installation joints are nylon
Voltage range: 3~5V
Speed: 5~10mm/s
Thrust: varies with voltage, between 0.5kg～0.75kg at 5v voltage
Internal power: DC decelerating motor, realize push rod expansion and contraction by controlling the motor forward and reverse.


Note: There is no limit switch in the upper and lower limit positions of the push rod, please pay attention to the limit position and cut off the power when the buyer uses it, or use an external limit switch, otherwise the motor is blocked and burned.

Product 1

Product 2

Product 3

Stroke 30mm with remote control

The push rod can be telescopically controlled by remote control. The red wire of the remote control module is connected to the positive pole of the power supply, and the black wire is connected to the negative pole of the power supply. The yellow wire is connected to the two wires of the push rod, without distinguishing the positive and negative poles.

Product 4

Stroke 45mm with remote control

The push rod can be telescopically controlled by remote control. The red wire of the remote control module is connected to the positive pole of the power supply, and the black wire is connected to the negative pole of the power supply. The yellow wire is connected to the two wires of the push rod, without distinguishing the positive and negative poles.