Specification Of Machine:
Name:Mast Flip
Working Voltage: 5-12V
Weight: 173g
Stroke: 2.6/2.9/3.2/3.5/3.8/4.0mm
Speed: 12V/10000RPM
Length: 111mm
Diameter: 30mm
Motor:Custom Mast Coreless Motor 
Interface:RCA Socket 

Machine characteristics:
1,One Pen for All Tattoo Styles
2,The ergonomically design helps to reduce hand fatigue during procedures
3,Simple Operat System:Mast Flip is one new designed machine that with six stroke length options
2.6/2.9/3.2/3.5/3.8/4.0mm.
4,Stroke length easy changed on working,The Flip Pen Made for All Pro Artist

Specification Of Power Supply:

Material:Aluminium
Output voltage:6 7 8 9 11v
Input voltage:DC5V/1A
Charge mode:type-c quick charge
Connection:RCA cord
Battery capacity:1200mAh
Size:27.5*62.8mm
N. W:57g
G. W:122g

Protective Mechanism:

1.Output short circuit protection
2.Dual input charging protection (batteries and the control board both equipped with shutdown,overshoot and over discharge protection)

Instruction Manual:

1.Press and hold the power button 2 seconds to turn on/off.
2.Click the power button to adjust the voltage 6 7 8 9 11V.
3.Default booting at 10V start-up voltage in 0.2s,then load to the last memory working voltage.
4.It will shift to display the capacity of battery without working over 2s, and the indicator light is on the breathing state,the five indicators represent for 20%-100% of the power capacity,Click the button return to voltage display. 5. The indicator light is blinking during charging, stop blinking with the overshoot protection working when full charged.
6.The pack capacity is 1200mAh,3.5 hours to be full charged at above 1A charger,about 8 hours working at 8V . 7.This pack is only for rotary machines but coil machine.
8.Don't use this pack while charging.

Problem Solution:

Please connect with charger to activate when shut down.