Color	6M GPS 8N GPS black holder 8N GPS red holder 8N GPS silver holder 8N GPSwithout holder
6M GPS 8N GPS black holder 8N GPS red holder 8N GPS silver holder 8N GPSwithout holder

Description
Customer Reviews(0)

Item specifics

Use: Vehicles & Remote Control Toys
Four-wheel Drive Attributes: Slot
Brand Name: Readytosky
Tool Supplies: Cutting
Remote Control Peripherals/Devices: ESC
Technical parameters: Value 3
RC Parts & Accs: Engines
Material: Metal
Upgrade Parts/Accessories: Shock Absorber
For Vehicle Type: Airplanes
Model Number: OEM

Product Description

A new generation GPS M8N,with low power consumption and high precision, the ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation 7N 1.4-1.6 meters accuracy,support GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 protocol and mode or more. GPS Chip parameters: Receiver type 72-channel u-blox M8 engine GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 SBAS L1 C/A: WAAS, EGNOS, MSAS Galileo-ready E1B/C (M8N) Nav. update rate1 Single GNSS: up to 18 HZ Concurrent GNSS: up to 10 Hz Position accuracy2 2.0 m CEP Sensitivity2 Tracking & Nav: –167 dBm Cold starts: –148 dBm Hot starts: –156 dBm Assistance AssistNow GNSS Online AssistNow GNSS Offline (up to 35 days)3 AssistNow Autonomous (up to 6 days) OMA SUPL & 3GPP compliant Oscillator TCXO (M8N/Q), Crystal (M8M) RTC crystal Built-In Noise figure On-chip LNA (M8M). Extra LNA for lowest noise figure ( M8N/Q) Anti jamming Active CW detection and removal. Extra onboard SAW band pass filter (M8N/Q) Supported antennas Active and passive Odometer Travelled distance Data-logger For position, velocity, and time ( M8N) Operating temp. –40° C to 85° C Storage temp. –40° C to 85° C (M8N/Q) –40° C to 105° C (-M8M) RoHS compliant (lead-free) Qualification according to ISO 16750 Manufactured and fully tested in ISO/TS 16949 certified production sites Uses M8 chips qualified according to AEC-Q100 Supply voltage 1.65 V to 3.6 V (M8M) 2.7 V to 3.6 V (M8N/Q) Power consumption4 23 mA @ 3.0 V (continuous) 5 mA @ 3.0 V Power Save Mode (1 Hz, GPS mode only) Backup Supply 1.4 to 3.6 V - 1 x M8N / 6M GPS Module with translucent Shell ( M8N or 6M GPS send as your choice) - 1 x GPS Holder ( send by your choice) We left a connector for APM extra,If you need used for APM, you can install the connector by yourself or leave us a message ,we will change for you . Original connector is for Pixhawk flight control board my friend! Note: The M8N GPS firmware is fixed , so it is no need to revise firmware after you recieved . if you mind, please do not buy.

Item Picture