M5CameraF is a development board for image recognition. It features an ESP32(4M Flash + 520K RAM) chip and 2-Megapixel carmera(OV2640).M5CameraF offers plenty of storage, with an extra 4 Mbyte PSRAM. It also supports image transmission via Wi-Fi and debuging through USB Type-C port.

The hardware comes preloaded software, programmed by ESP-IDF. It is an application to run Wi-Fi camera. The output image is size 600*800, since it’s 2-Maga camera, you sure can optimize the software to output the maximum size of photos.

what this software can do?

• Power the board via USB type-C or GROVE
• Use your phone to Wi-Fi scan an AP name start with ‘m5stack-‘ and click to connect this AP.
• Open up web browser on your phone and visit 192.168.4.1
• Then here comes the picture. Video is about 5-6 frames per senconds. not super fast.

The hardware also comes with some reserved weld pad, just in case you want put these chips back on board.

• 9-axis gyroscope (MPU6050)
• pressure sensor (BME280)
• Digital silicon microphone (SPM1423）
• 
  
  • 1x M5CameraF
  • 1x LEGO Adapter
  • 1x Wall/1515
  • 1x Type-C USB Cable

• Feature

  • ESP32 specifications
    • Dual-core Tensilica LX6 microprocessor
    • Up to 240MHz clock frequency
    • 4MB PSRAM
    • 4MB Flash memory
    • Integrated 802.11 BGN WiFi transceiver
    • Integrated dual-mode Bluetooth (classic and BLE)
    • Hardware accelerated encryption (AES, SHA2, ECC, RSA-4096)
  • CP2104 USB-to-TTL converter
  • OV2640 sensor
    • Output Formats(8-bit):
      • YUV(422/420)/YCbCr422
      • RGB565/555
      • 8-bit compressed data
      • 8-/10-bit Raw RGB data
    • Maximum Image Transfer Rate according to specific format
      • UXGA/SXGA: 15fps
      • SVGA: 30fps
      • CIF: 60fps
    • Scan Mode: Progressive
  • Camera specifications
    • Field of View : 160 degree
    • Maxmium Pixel: 2-Mega
  • Sensor best resolution: 1600 * 1200
  • Size：23.5 × 48 × 23.5mm

  Include