Blue Violet Laser Engraving Head With 2 Pieces Wood Plates

Blue Violet Laser Engraving Head With 2 Pieces Wood Plates

This is a laser module that enables the user to engrave wood, acrylic, paper, and many more substances. It can also cut wood and acrylic, depending on the wattage.

An advantage of laser modules is that no firmware upgrade is necessary to run most of them. Typically, they can just clip magnetically to the tool head(attached with magnets). They run from the fan port on the machine and are usually quick to assemble.
This laser module has three strong disc magnets. Therefore, it is suitable for 3D printers that have iron nozzle cover, which includes but is not limited to Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, etc.
Creality’s laser kit is only for engraving due to its 500-mW laser.
Wavelength: 445 nm (blue)
Power: 500 mv
Voltage: 12 V (DC)
Working current: 2,100 mA

How to Install the Laser kit on Ender3 V2：Guide

Warning:
- A Laser is capable of damaging your eyesight, skin, and other people.
- Please read and follow this guidebook carefully before using the laser kit.
- Eye protection is needed when you work with the laser kit.
- The magnets on the laser head are very strong but brittle.
- Laser engraving/cutting can cause smoke, depending on the workpiece, it is necessary to place your machine in a well-ventilated environment.