12mm IP67 LED Water Resistant Electric Switch

A4126 series waterproof push button switch , protection degree reach IP67 ,installation size is 12mm. According to the material , it has metal push button switch and plastic push button switch . All the switches has self-locking and momentary two different kinds . If equip with LED light , colour can be customised based on the customer's request . It widely used in beauty equipment , small yacht, lamps, medical equipment , military communication intelligent network equipment and the other instruments .

Function

Momentary: Means that when you push switch and then move your finger, the actuator will back to the original position.

Latching: Means that when you push switch once it will change state and stay in this pushed-down position and will not come back to original position unless you push it again.

Note

Resistor not inside ,should soldering resistor outside when operation.

LED voltage 2.4V does not need the outside resistor

Color switch head led is the same with the switch head color

Technical Paremeters

1. Operating force ≤6Nf, best range is 5Nf~6Nf , Maximum endurance 5kgf
2. Contact resistance ≤50m Ω
3. Rated current 3A , rated voltage 250VAC
4. Insulation resistance ≥100m Ω/min
5. Withstand voltage: AC 1000V(50~60hz)/min
6. Solderability: soldering iron 340°±5°/1-2s
7. Solder resistance: soldering iron 340°±5°/3-5s
8. Durability : Electrical life 50000 times, Mechanical life 100000 times
9. Protection degree: IP67
10 Material: Dupont Nylon PA66+20% glass fiber
11. Installation size: 12mm