Driver Donwload

http://www.mmui.com.cn/data/upload/image/JMB582_585_586_5810_5824(PM).zip

ESXI7.0 pass-through requires the following settings:

"Search in [Host] - [Administration] - [System] - [Advanced Settings]: VMkernel.Boot.disableACSCheck (skip the ACS function check for all PCIE devices), the default is false, and it is set to true by editing"
pass-through

The Speed of Connecting 5 SSDs at the same time :

(Reminder: The following test data is for reference only. Different devices and different environments may be different, please understand!)

Using the JMB585 chipset, the adapter can provide M.2 (PCIe Gen3 x2 bandwidth) to 5 Port SATA 6Gb / s card solution. For the storage solution based on data transfer of multiple hard drives, the newly added FIS-based switching design can overcome the bottlenecks created by operating multiple SATA storage devices simultaneously. The data transmission rate of the JMB585 can achieve to 1700MB/s, which is the maximum transfer speed of PCIe Gen3 x2.

Features

• 2-Lane M.2 PCI-Express 3.0 interface (B & M Key).
• Complies with PCI Express Base Specification Revision 3.1a.
• Supports PCIe link layer power saving mode.
• Supports command-based and FIS-based for Port Multiplier.
• Complies with SATA Specification Revision 3.2.
• Supports 5 SATA port.
• Supports AHCI mode and IDE programming interface.
• Supports Native Command Queue (NCQ).
• Supports SATA link power saving mode (partial and slumber)
• Supports SATA plug-in detection capable.
• Supports drive power control and staggered spin-up.
• Supports SATA Partial / Slumber power management state.
• Supports Port Multiplier.

System Requirements

• Windows 7 (X86/X64)
• Windows 8/8.x / 10 (X86/X64) (Windows in-box driver)
• Linux-base OS
Note: Does not support RAID on Port Multiplier.

Package Contents

• 1 x M.2(PCIe3.0) to SATA 6G Adapter
• 1 x User Manual
•3 x SATA Cable
• 1 x Driver CD