Feature:
Infrared sensor switch and general-use switch.
• On/ Off and PIR operation settings.
• When the switch is turned to “ON” or “OFF”, it can be used as an ordinary switch, and when it is turned to “PIR”, it can be used as an infrared sensor switch.
• The light sensitivity and duration of time is adjustable.
• Commonly used to control lighting and ventilation
• Power-saving by ensuring lights and fans are not left on
• Saves energy by ensuring lights and fans are not left on

Specification:
Power Source: 110-240 V / AC
Detection range: >140 degree
Power frequency: 50-60 Hz
Working temperature: -20~+40 centigrade
Ambient light: 3-1000 LUX (adjustable)
Working humidity: < 93% RH
Time-delay: 5 sec. - 7 min. ± 2 min. (adjustable)
Rated load: 500 W ;
Installation height: 0.4~1.8 m
Power consumption: 0.45 W (work) 0.1 W(static)
Detection moving speed: 0.6~1.5 m/s
Detection distance: 10 m max (< 22 centigrade)

Function:
1.Can identify day and night: The consumer can adjust work ambient light. It can work in the daytime and at night when it is adjusted on the “sun” position (max). It can work in the ambient light less than 3 LUX when it is adjusted on the “moon” position (min). As for the adjustment pattern, please refer to the testing pattern.
2.Time-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basic.(set time)
3.Time-delay adjustment: It can be set according to the consumers desire. The minimum time is 10sec ± 3 sec. The maximum is 7 min ± 2 min.
4.Switches: “ON”,“OFF”,“PIR”