- 0Carrito
-
Su carrito está vacío.
-
más artículos en el carro...
Carro Total: $0.00
Pasar por caja
Su carrito está vacío.
Carro Total: $0.00
Pasar por caja
|
Item specifics
Product Description
Hot IPS LCD Kits with pre-cut housing for Gameboy GBA SP IPS LCD V2 Backlight Screen with shell case For GBASP ConsoleThe mainboard of the console, hinges and battery are not included. The glass screen lens contains logo. *This IPS backlight LCD has 10 Levels of brightness. * It can suitable for AGS-101 and AGS-001. *The glass screen lens has been sticked to the LCD display
If you want all 10 levels of brightness you will need to solder one wire from the motherboard onto the screen. The solder point is Q12B on the motherboard.
Link 1: With clear housing (Newest housing. No need cut) https://www.officematics.com/item/4001328664408.html Product Description: * Suitable for GBA SP gamepad consoles. * With fully fitted LCD screen, no need buy lens. * The replacement is relatively simple and does not require complicated modifications, connect and use. * Help to replace the broken screen, repair the old game machine. * Wide color gamut, ultra-high contrast IPS screen with a viewing angle of 178 degree. * Reduce the reflection to make the color more vivid, and never get into the ash. * The original brightness adjustment button function is retained for brightness adjustment, and support 5-level brightness adjustment. (Need to weld one wire) Product inlcuded: 1 x LCD Screen 1 xWelding Wire 1 x Foam 1 x Ribbon Cable 2 x Screw drivers 1x Pre-cut housing set (Buttons,shell, Conductive pads, stickers included. Hinges are not included)1. Buyers Note |