This is a handheld and multifunctional thermal imager, compact and lightweight, easy to carry. It can be used in a variety of situations and is an indispensable tool for household and industry use.
 

Type A:
Features:
With the housing, you can use it directly, the sensor resolution is 24*32 dot matrix.
Built-in rechargeable lithium battery, mciro USB interface, interface voltage does not exceed 5V.
The response frequency is 8Hz, the target temperature measurement range is -40~+300℃, and the use environment is 0~50℃.
The emissivity can be adjusted from 0.01 to 1.00 range.
Sensor probe field angle, default 35 degrees*55 degrees MLX90640ESF-BAB probe.
2.4 inch LCD screen resolution is 320*240, the screen shows the highest temperature, the lowest temperature, the center point temperature, displays each coordinate point.
The measurement accuracy is ±2℃.
With a screenshot function, you can pause the picture for analysis.
With the screen color corresponding to the temperature adjustment function, you can set the temperature to display different colors.
With USB data transmission interface, can upgrade the system later, free to update the internal system, the default system version 1.0.
Can be applied to human body temperature detection, PCB component heating temperature detection, floor heating temperature detection, automotive parts temperature detection, electrical switch temperature detection, air conditioning and microwave oven detection, etc.

Specification:
Material: ABS
Color: black
Display: 2.4 inch color display, 320*240
Resolution: 32*24
FOV/Shortest focal length: 55°*35°
Temperature range: -40℃~300℃
Measurement accuracy: ±2℃
Imaging frequency: 8Hz
Emissivity: 0.01~1.00 adjustable
Focus mode: fixed
Power supply: 1 * lithium battery, 1000mAh (included)
Working temperature: 0℃~50℃
Storage temperature: -40℃~70℃
Humidity: <90% RH
Item size: 79 * 50 * 32mm / 3.1 * 2.0 * 1.3in
Item weight: 66g / 2.3ounce
Package size: 150 * 100 * 35mm / 5.9 * 3.9 * 1.4in
Package weight: 68g / 2.4ounce

Package list:
1 * Thermal Imager

Type B:

Features:
With the housing, you can use it directly, the sensor resolution is 24*32 dot matrix.
Built-in rechargeable lithium battery, Micro USB interface, interface voltage does not exceed 5V.
The response frequency is 8Hz, the target temperature measurement range is -40~+300℃, and the use environment is 0~50℃.
The emissivity can be adjusted from 0.1 to 0.99 range.
Sensor probe field angle, default 35 degrees*55 degrees MLX90640BAB probe.
2.4 inch LCD screen resolution is 320*240, the screen shows the highest temperature, the lowest temperature, the center point temperature, displays each coordinate point.
The measurement accuracy is ±2℃.
Camera function: built-in memory, you can take 100 photos. Once the Micro USB cable is connected to the computer, you can view, copy, and delete the images on your computer.
Can be applied to human body temperature detection, PCB component heating temperature detection, floor heating temperature detection, automotive parts temperature detection, electrical switch temperature detection, air conditioning and microwave oven detection, etc.

Specification:
Material: ABS
Color: black
Display: 2.4 inch color display, 320*240
Resolution: 32*24
Field of view: 35° * 55°
Temperature measurement range: -40℃~300℃
Measurement accuracy: ±2℃
Refresh rate: 8Hz
No calibration required
Emissivity: 0.1~0.99 adjustable
Battery: 1 * lithium battery, 1000mAh (included)
Charge time: about 2 hours
Power: Micro USB 5V/1A
Working temperature: 0℃~50℃
Item size: 160 * 56 * 25mm / 6.3 * 2.2 * 1.0in
Item weight: 119g / 4.2ounce
Package size: 180 * 100 * 30mm / 7.1 * 3.9 * 1.2in
Package weight: 121g / 4.3ounce

Package list:
1 * Thermal Imager

Type C:

Made of fine quality material, practical, easy to operate and use, wide application range, has a long service life.

Features:
2.4" TFT full view color screen display.
Dual MCU processors, refresh faster.
Low power consumption, strong endurance.
Hot and cold point temperature markers can guide users to the areas with the highest and lowest temperature in the thermal imaging.
5 kinds of pallettes are available.
Hybrid imaging of visual and infrared images.
Images capture saved in S-D card. (S-D card is not included)
Hybrid imaging of visual and infrared images is stored in the instrument directly.
Connect USB with other power supply and meter, use a power supply to meter directly.
High sensitivity and high definition, automatic tracking of cold and hot spots.
Can be widely used in fire, archaeological, transportation, agriculture, geology, energy, smelting, electronics manufacturing, etc., is a perfect choice for electricians and maintenance technicians, can be used for rapid positioning.

Specification:
Material: ABS+rubber
Color: orange+beige
Battery: 4 * AA battery (not included)
Infrared imaging resolution: 32 * 32 (1024 pixels)
Display resolution: 240 * 320 pixels
Visual imaging resolution: 300000 pixels
Field angle: 33 * 33 degrees
Infrared Temp. range: -20~380℃ / -4~716℉
Accuracy:
＞0℃, ±2% or reading ±2℃ / 3.6℉
＜0℃, ±3℃ / 5.4℉
Accuracy is measured in an environment of 18-28 degrees.
Ambient Temp. range: -20~70℃ / -4~158℉
Accuracy: 1.0℃ / 1.8℉
Ambient humidity range: 0~hundred percent RH
Accuracy:
35~70%RH: +3.0%RH
Others +4.0%RH
Dew point Temp. range: -30~100℃ / -22~212℉
Accuracy: ±1.0℃ / 1.8℉ (25℃ / 77℉, 35~70%RH)
Wet bulb Temp. rang: -30~100℃ / -22~212℉
Accuracy: ±1.0℃ / 1.8℉ (25℃ / 77℉, 35~70%RH)
Mininum focal length: 0.5m
Thermal sensitivity: 0.15℃ / 0.27℉
Emissivity: adjustable 0.1~1.0
Imaging capture frequency: 9Hz
Wavelength: 8~14μm
Focus mode: fixed
Palette: ink color, black and white, rainbow color, ocean blue, iron red
View options: blending of the visual and the infrared from full infrared to full visual in 25% steps
File format: BMP
Storage: 8GB Micro S-D card (not included)
Memory view: scroll all saved images and view them on the screen
USB function: connect USB cable with PC, meter works as U disk, stored data in S-D card can be downloaded to computer directly, connected USB cable with other power supply to the meter directly and meter works as usual during this time
Auto power off: 3 minutes, 5 minutes, 10 minutes are optional
Working temperature: -5~40℃ / 23~104℉
Storage temperature: -20~55℃ / -4~131℉
Relative humidity: 10~80%RH
Over-range indication: OVER
Item size: 200 * 100 * 35mm / 7.9 * 3.9 * 1.4in
Item weight: 237g / 8.4ounce
Package size: 275 * 165 * 50mm / 10.8 * 6.5 * 2.0in
Package weight: 393g / 13.9ounce

Package list:
1 * Thermal Infrared Imager
1 * USB Cable
1 * User Manual

Type A:

Type B:

Type C: