1. HKCPA12CR bidirectional self-locking cross master switch is equipped with 2 normally open (2NO) mounting holes Φ22mm, its function is that the handle can be moved from the center to the left and right (or front and back) in two directions, when the handle is pulled to one direction, you need to use your hand It can be reset to the center position only by pulling the handle; each time a direction is controlled, a normally open contact underneath is controlled. When the handle is moved to a direction, the normally open contact under the control is closed (the connected circuit is connected), and the hand is released Stay in the new position (the connected circuit remains connected), need to disconnect the circuit, manually pull the handle to the center position; control two separate circuits in each direction!

2. HKCPA14CR four-way self-locking cross-master switch is equipped with 4 normally open (4NO) mounting holes Φ22mm. Its function is that the handle can be pulled from the center to the left, right, back and forth directions. When the handle is pulled to one direction, it needs to be pulled by hand The handle can only be reset to the center position; each flip of one direction controls a normally open contact underneath, when pulled to one direction, the normally open contact controlled below closes (the connected circuit is connected), the hand releases and stays New position (the connected circuit remains connected), need to disconnect the circuit, manually pull the handle to the center position; four directions control four separate circuits respectively;

3. HKCPA22CR bidirectional self-recovering cross master switch is equipped with 2 normally open (2NO) mounting holes Φ22mm. Its function is that the handle can be moved from the center to the left and right (or front and back) in two directions. When the handle is pulled to one direction, the hand release The handle will automatically spring back to the intermediate zero position; each flip of one direction controls a normally open contact underneath, and when pulled to one direction, the normally open contact controlled below closes (the connected circuit is connected), and the hand is loosened The open handle automatically springs back to the center position, the lower contact is reset to the normally open state (the connected circuit is disconnected), and two separate circuits are controlled in both directions!

4. HKCPA24CR four-way self-reset (that is, automatic reset, instant on or off) cross master switch is equipped with 4 normally open (4NO) mounting hole Φ22mm, its function is that the handle can be pulled from the center to the front, back, left and right directions When the handle is pulled to one direction, the hand releases the handle and automatically springs back to the center; each time you pull one direction, it controls a normally open contact underneath. When the handle is moved to one direction, the normally open contact controlled below closes (connected The circuit is connected), the handle automatically springs back to the center position after the hand is released, the lower contact is reset to the normally open state (the connected circuit is disconnected), and four separate circuits are controlled in four directions

Package Content: 1pcs