Descripción
Comentarios de clientes(0)

Item specifics

Brand Name PoE World
Certification CE FCC
Origin CN(Origin)
Model Number GPOE-8-B
Data Rate 10/100/1000Mbps
Connector RJ-45
Input 12-56 DC 2.1 mm
output 12-56 Per Port ( 30W Max)
Data Cable TIA/EIA 568 Cat.5
Data In Connects PC/HUB/Switch
Warranty 1 Year
Application IP Camera/ VOIP/Wireless AP
Certification CE/ROHS
Operating Humidity 10%-80%

Product Description

Mode B Security Gigabit 8 Port PoE Injector 802.3af PoE Patch Panel

1000Mnps Networking PoE injector For Mikrotik and Ubiquiti

• 8 Port Gigabit Ethernet Injector

– 8 Shielded RJ-45 LAN

– 8 Shielded RJ-45 LAN+POE

– 10/100/1000 data rates

• Injector: 180 mm x 45mm x 25mm

including 2x 10mm tabs

• Wall mount - stackable

• 1000 ma automatic resettable fuse on each port

• Same voltage to all ports power is shared as needed by the devices

• Use with any Ethernet switch

– PoE or non-PoE switches

• Standard power connector

- 2.1mm x 5.5mm

• Operating Temperature

– 0 to 65 deg C

• Mode B operation - pins 7,8 (-) - pins 4,5 (+)

• Ideal for IP Cameras, VOIP phone, WiFi Access Points

• Select the power supply you need 30, 60 or 120 watts

• Power is always on - no autonegotiation

This item did not include the power supply. We offer kits with power adapter here. Please select the one you need and click the picture.

How to selet the power supply?

For example, if the specification of the camera shows it need 12VDC/802.3af/POE, and the power consumption is 6 Watt, and you ou have 8pcs of this camera.

Here, we will suggest you to take the 48V60W power supply.

Becuase the 802.3af means it's standard PoE, it's 48Volt, and 8pcs * 6 Watt per camera = 48Watt total

you should take the 48V and more than 48Watt power supply.

HOW TO INSTALLATION YOUR PoE

Step 1 Select switch or injector by number of devices and data rate. Step 2 Select power supply by PoE standard and power consumption. Step 3 Plug DC power supply into DC input(use Mode A on Dual Mode Injectors) Step 4 Plug DC power supply into AC power outlet. Step 5 Connect Ethernet jumper from data source to LAN port on your PoE injector.

Step 6 Connect Ethernet cable from device to the PoE port on your PoE injector.

Tips:

1. The installation site must be away from heat source and electromagnetism interference source, non-corrosive gas and metal dust. 2. Must not block the cooling hole of the equipment. 3. Installation must be stable fixed placing, not a violent shock. 4. Prevent to crash and conflict with other equipment during the installation, so as not to cause Local damage of the machine surface. 5. When storing, must be kept in dry warehouse, not exposure to sun and rain.