Item specifics
-
Brand Name
YIXINYOU
-
Motor Type
DC Motor
-
Model Number
Hallless brushless motor ESC drive
Hallless brushless motor ESC drive,
Originally used on brushless electric drills,
The estimated maximum power is about 300W,
Internally drive 6 Toshiba TPCA8057 power MOS tubes,
Drive fully sealed glue filling process,
Aluminum alloy shell for heat dissipation,
High temperature resistant electrolytic capacitor,
The workmanship materials used by big factories are very good.
The drive can work between the measured working voltage of 15-24.5V,
5S lithium battery, the drive supports forward and reverse and stepless speed regulation,
Speed regulation 10K potentiometer and switch need to be equipped by yourself,
See the picture introduction for the definition of wiring.
If you need an electric drill button switch, you can match the universal 8P socket brushless electric drill switch.
The measured compatibility of the sensorless drive is also good,
It can be said that it supports most of the high-power type high and low speed brushless motors,
The owner tested the DJI 6010 brushless motor without load,
1080W inner rotor brushless motor,
Nidec's 600W motor,
8312 disc type brushless,
2312 brushless motor,
The ultra-high speed brushless motor of the vacuum cleaner can be started and operated normally,
Our low-speed low-power type inner rotor 7-shaped deceleration and 51mm diameter low-speed brushless are not acceptable,
It is estimated that the power is too small and the small difference between the coils is too incompatible.
Other types of motors are not tested one by one, and need to be measured by yourself.
Be careful not to overload the brushless drive,
It is recommended not to use motors with too much overload,
So as not to burn the driver,
Pay attention to the driving heat during DIY use,
Output UVW three-phase is strictly prohibited short circuit,
The positive and negative poles of the power input must not be mistaken.
The drive weighs about 57 grams.
 |
Complementos Moda