ENERGETIC New 3D Printer 120x120mm/4.7"x4.7" Removal Spring Steel PEI Print Bed with Magnetic Base for Voron 3D Printer Parts

ENERGETIC is the first one who sells PEI sheets and spring steel sheet as the 3d printer surface in China. ENERGETIC is using one very special spring steel sheet what is never rust and always flat, the quality is superb not like other sellers who is using poor quality material what is not flat and curved when heating.Donrsquot earn regrets for just saving seveal bucks as you can see other sellers are coping our flexplate even stole the description from our store directly.

You wonrsquot buy regrets from ENERGETIC!!!

Items Included:

Product1:Spring Steel Sheet pre-applied PEI Sheet+Magnetic base*1

Product2:Spring Steel Sheet pre-applied PEI Sheet*1

Product3:One side Textured PEI power-coated Spring steel Sheet*1

Advtanges:

• Never warp& Never rust.

• Easy to get the first layer even for a new user

• Flexible, Removable, stick to magnets very well

• Suits variety of filaments, especially for PLA

• Free clean- just flex the plate a little then take the prints off after cooled

• Fast heater performance, less waiting time after printing.

• A lifetime 3D printer bed

Why our price is higher?

2.Our spring steel sheet is flat.

3.Strong magnetic base: 1.5MM, 300LSE tape,  magnetism-600GS  high temp resist up to 130C at long time

Material:

• 100% real Ultem1000（ PEI）amber color, matte surface. - Made in Europe

• This spring steel sheet is flat, flexible, stainless stick to magnets very well. 0.4mm thickness

• PEI is 3m tape pre-applied, free bubbles.

Important Information:

1.Recommend print temps

• PLA – 60C

• HTPLA – 60C

• PETG – 70-80C

• PCTG – 70-80C

• ABS – 100C

2.Product Usage Guidelines

• PETG/PCTG/TPU– If you are not careful with your 1st layer you can risk bonding the PETG/PCTG/TPU to the PEI surface. This will damage the surface. To prevent damage to the surface apply hairspray or PVA gluestick before printing PETG/PCTG/TPU on the PEI

• Part Removal– Make sure your plate is at close to room temp (under 30C) before removing parts. If you remove when hot it more likely to damage the surface

How to use?

1. After apply the PEI sheet on our special spring stainless steel sheet, You can simply use 4 clips or magnets to hold it on the heatbed, then enjoy the printing.

2. Easily remove 3D prints on printer by removing the spring steel plate, flexing it, and popping the print off. It's simple and makes the print removal process much easier.

3. For details, Check the guide video on Youtube

Aftersales:

If any quality problem, free returning.

Or send a message, we will reply you within 12 hours

Happy Printing!!!