Notice: 8mm 10mm Led button must be connected to the outside resistor when used. Otherwise it will burn out

Notice: The welding must be completed within 3 seconds, otherwise the inside will be damaged easily

Specification

If you need special specifications, please feel free to contact customer service,we can customize it .

Contact:sterling silver
Material: Nickel Brass
Color: Silver
LED color: White Yellow Red Green Blue
Switch Rating: 3A /250VAC
Waterproof Grade: IP65
LED Voltage: 3-6V,12V,24V,220V
Operation Type: Momentary and Latching
Hole size: 8/10/12/16/19/22mm

Voltage Selection

3V-6V :3V 5V 6V
12V-24V: 12V 24V
220V: 220V 230V
Other voltages are required. Please contact customer service
No led switch button can be applied to 2-250V.

Pin Terminal Introduction

"+": positive pole of the led
" - ": negative pole of the led
" NC ": Normal Close
" NO ": Normal Open
" C " : Common
Connect " NO " and " C " : The circuit is alway open unless press the button.
Connect " NC " and " C " : The circuit is alway close unless press the button.
8mm Button

8mm Button (which is momentary and no led ) only has Camber Head. Other 8mm button only has High Head.
8mm Led button must be connected to the outside resistor when used
Please allow 0.1-0.3mm differs due to manual measurement,8mm