[Wide compatibility] The Gamepad is compatible with PC Windows XP/7/8/10/11 system, PC Steam and also compatible with PS3, Nintendo Switch and Android phones, tablets, Android TVs, TV boxes that support OTG and version 5.0 or above

[Adjustable double vibration] The Gamepad with Built-in asymmetrical double vibration somatosensory motor, five levels of vibration intensity can be adjusted, real experience of collision, vibration, shooting and other scenes in the game

[Adjustable LED light] The Gamepad with ABXY button and the right joystick are equipped with cool LED lights. The brightness of the light can be adjusted in 5 levels.

[Programmable buttons]The Gamepad are 4 programmable buttons M1, M2, M3, and M4 at the bottom of the handle, which can be completed by one button for difficult operations, allowing gamers to instantly improve their level and enjoy the pleasure of the game.

[Linear trigger] The Gamepad with linear trigger allows gamers to linearly increase the speed in the racing game, bringing gamers a better gaming experience

[Wireless connection] The Gamepad adopts 2.4G wireless transmission technology, with stable signal, strong anti-interference, long connection distance, and no delay. The controller is plug and play, no need to install additional drivers

How to Connect to PC

Connect via Xinput Mode:

Press HOME button to switch on the controller and LED1, LED2,LED3 and LED4 start flashing and pairing begins.
Insert the receiver or USB cable into the USB port of your computer and the game controller starts pairing with the receiver. LED1 and LED4 will remain on, meaning the connection is successful.
If LED1 and LED4 are not glowing solid, press MODE button for 5 seconds until LED1 and LED4 remain illuminated.
Note: After pairing, LED1 and LED4 will blink and vibration will be switched off when batteries are running below 3.5V


Connect via Dinput Mode:

Press HOME button to switch on the controller and LED1, LED2,LED3 and LED4 start flashing and pairing begins.
Insert the receiver or USB cable into the USB port of your computer and the game controller starts pairing with the receiver,LED1 and LED3 will remain on, meaning the connection is successful.
If LED1 and LED3 are not glowing solid, press MODE button for 5 seconds until LED1 and LED4 remain illuminated.

Gamepad Mode

Xinput Mode: LED1+LED4
Dinput Mode: LED1+LED3
Android Mode: LED2+LED3

How to set the customized buttons

1.Press and hold the button that needs to be customized, such as M1,and then press the BACK button. At this point, the ring LED light chang-es to a mixed color and enters the custom state.
2.Press the button that needs to be programmed to M1, such as A button. It can also be the combination button A B button.
3.Press the M1 button again, the ring LED will turn blue, setting successfully. Other M2 M3 M4 button settings are the same as above.