The black lens is actually dark gray. Close to the original Nintendo color. Because we used to call it black. And the color is very close to black. There is color difference in taking photos. It looks like black.

The wire on the cable must be connected to the positive pole of the battery base! The wires on the cable are very thin. If it is broken, please weld a new wire by yourself. We are not responsible.

Please bring your own Gameboy pocket motherboard.

With high quality housing and glass lens. The housing includes buttons.

The shell is customized by us. It is not necessary to trim the shell.

Each set of LCD has been tested before shipment. You can test it again like this before installing.

Test before installation. It is helpful to find out the causes of problems in later installation.

Please see the installation precautions first. The installation tutorial is at the bottom.

Do not squeeze the back and border of the LCD. Squeezing can cause uneven backlight, light spots and black spots. As shown in the figure below, due to the extrusion of the LCD frame, there are bright spots on the edge.
If the touch cable is lost or the cable holder is damaged, it can be replaced by ordinary wire. Weld as shown in the figure below.
Do not wipe the LCD screen with a coarse paper towel. It will leave a scratch.
Do not wipe the LCD screen with a very wet paper towel. The LCD will water in. There are light spots and dark spots.
Remove the LCD protective film and install the LCD immediately. Do not touch the LCD with your hands. In this way, the LCD screen will be perfect.
Please do not fold up the cable with electronic components, which will result in LCD display failure.

Product features:

1) IPS LCD screen. Small amount of shell cutting, simple installation.No welding is required.
2)Touch to adjust brightness and change color. Short touch is to adjust backlight brightness, long touch is to change color.Black and white, retro, green, dark yellow, bright yellow five color adjustment.
3)The usage time is OK. With the 900 Ma Xiaomi battery, the screen has the highest brightness, and the battery life is 3 to 4 hours.Different game cartridge, use time will be different.
4)The screen display scale is correct, 4 points to 1 point.
5)The size of the display screen is the same as the original one, and the original mirror can be used.

Installation tutorial

1）Cut the housing as shown.
2）Paste 0.5mm thick double-sided adhesive tape on the right side of LCD frame. Used to center and fix the LCD screen. 5 layers of ordinary double-sided adhesive tape. Make the thickness of double-sided adhesive tape reach 0.5mm.
3)The LCD screen can be aligned to the upper right corner.LCD top to top and right.
4)The left side of LCD frame is fixed with sponge double-sided adhesive tape.Don't be too tight, it will squeeze the LCD frame.LCD frame extrusion deformation will lead to uneven backlight display.
5)Pay attention to fully insert the LCD cable and fasten the cable base.

The production of bright shell is more difficult than frosted shell.It is normal for the shell to have some die marks.