Color	2.6 GBC Black 2.6 GBC blue 2.6 GBC claret 2.6 GBC GBH 2.6 GBC golden 2.6 GBC green 2.6 GBC grey 2.6 GBC No logo 2.6 GBC Pink 2.6 GBC silver 2.6 GBC white
2.6 GBC Black 2.6 GBC blue 2.6 GBC claret 2.6 GBC GBH 2.6 GBC golden 2.6 GBC green 2.6 GBC grey 2.6 GBC No logo 2.6 GBC Pink 2.6 GBC silver 2.6 GBC white

Description
Customer Reviews(0)

Item specifics

Brand Name NICOS
Origin Mainland China
Compatible Brand/Model Nintendo
Compatible Nintendo Model GameBoy Color

Product Description

The procedure was updated on January 10, 2022. Pixel display mode is supported. Long press the touch for 6 seconds to switch the display style.

The black lens is actually dark gray. Close to the original Nintendo color. Because we used to call it black. And the color is very close to black. There is color difference in taking photos. It looks like black.

Please carefully read the following precautions and installation methods before installation. The installation steps are really very simple. All you have to ask are below.

Install self provided tools: Y-shaped 3.0 screwdriver, cross 3.0 screwdriver, sharp art knife and top cutting pliers.

The LCD screen was carefully tested before delivery. Before installation, please turn on the GBC motherboard as follows to check whether it is normal.

Product features:

The 1.2.6-inch IPS LCD is larger than the original 2.45-inch LCD. Installation without welding, a small amount of shell cutting, simple installation.

2. Pixel points are 4 points to 1 point. Because the screen itself has large pixel points and has its own sense of granularity, the display screen is close to the original GBASP AGS-101screen, and the large screen is clearer.

3. Low power consumption, with millet 1800 Ma rechargeable battery, maximum screen brightness, edgb burning card, and normal game time of about 8 hours

4. Touch control, 5 segments to adjust brightness.

The following is the installation tutorial. The installation process is mainly shell cutting. The installation of LCD screen is very simple.

Peel off the red area shell.

Use the art knife to cut the shell to a deeper depth, and then use the top cutting pliers to cut off the shell.

First, paste the double-sided adhesive tape to fix the LCD screen. Be careful not to expose the double-sided tape in the LCD window.

Then paste the matching 0.8mm thick sticker on the right frame of the housing. If lost, use double-sided tape or other substitute, 0.8mm thick, to center the LCD screen.

Paste the LCD screen. tear off the protective film of the LCD screen and paste it immediately. Don't touch it with your hands, it will stick with dust.