Current	10A 20A 30A 40A 50A 60A

Description
Customer Reviews(0)

Item specifics

Brand Name EASUN POWER
Origin CN(Origin)
Certification NONE
Model Number ICharger PWM N1210/1220/1230
Application Charger Controller
Application Voltage Controller
Application Solar System Controller
Application Lighting Controller
Maximum Current 60A/50A/40A/30A/20A/10A
is_customized Yes
Charging current 60A/50A/40A/30A 20A 10A
Max Solar input 50V(24V battery) 25V(12V battery)
Float charge 13.7V(defaul adjustable)
Low voltage reconnect voltage 12.6V(defaul adjustable)
Low voltage disconnect voltage 10.7V(defaul adjustable)
USB output Dual 5V
Self-consume Less than 10mA
Application Charger Controller Solar System Controller Solar Regulator

Product Description

24V 12V Auto Solar Panel Battery Charge Controller 30A 20A 10A PWM LCD Display Solar Collector Regulator with Dual USB Output

SYSTEM CONNECTION
1. Connect the battery to the charge regulator-plus and minus.
2.Connect the photovoltaic module to the regulator-plus and minus.
3.Connect the consumer to the charge regulator-plus and minus.

The reverse order applies when deinstalling!

An improper sequence order can damage the controller!

This is NEW Solar Controller ,It can fully meet your home Photovoltaic system(including home lighting system )requirements .It can recongize 12V and 24V Lead acid ,Gel battery automatically

There are optional 10A 20A 30A model

10A:

if your battery is 12V ,the max solar panel input is 25V 120W

if your battery is 24V ,the max solar panel input is 50V 240W

20A:

If your battery is 12V, the max solar panel input is 25V 240W

if your battery is 24V, the max solar panel input is 50V 480W

30A

if your battery is 12V ,the max solar panel input is 25V 360W

if your battery is 24V ,the max solar panel input is 50V 720W

Features:

1.Build-in industrial micro controller.

2.Big LCD display,all adjustable parameter.

3.Fully 4-stage PWM charge management.

4.Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection.

5.Dual mosfet Reverse current protection ,low heat production.Display:

MENU:switch between different display,or to enter/exit setting by long press.

UP: press to increase value.

DOWN:presss to decrease value.

Setting:

1.press the [Down] button to ON/OFF load manully at main display.

2.the work mode is working as below:[24H] load output 24hours[1-23H] load on after sunset and closed after setting hours[0H] Dusk to dawn

MODEL	ICharger PWM 10A	ICharger PWM 20A	ICharger PWM 30A	ICharger PWM 40A	ICharger PWM 50A	ICharger PWM 60A
Battery Voltage	12V 24V Auto
Charging Current	10A	20A	30A	40A	50A	60A
Discharging Current	10A	10A	10A	20A	30A	30A
Max Solar input	50V(for 24V battery) 25V(for 12V battery)
Equalization	14.4V(Sealed) 14.2V(Gel) 14.6V(Flood)
Float charge	13.7V(defaul,adjustable)
Discharge stop	10.7V(defaul,adjustable)
Discharge reconnect	12.6V(defaul,adjustable)
Charge reconnect	13V
Voltage of open light	Solar Panel 8V(Light lights delay)
Voltage of close light	Solar Panel 8V(Light off delay)
USB output	5V/3A
Self-consume	<10mA
Operating temperature	-35°C~+60°C
Size	133.57035mm			133.57035mm

*all red color voltage X2 ,while using 24V system.

Connection:

1.Connect the battery to the charge regulator - plus and minus.

2.Connect the photovoltaic module to the regulator - plus and minus.

3. Connect the consumer to the charge regulator - plus and minus.

The reverse order applies when deinstalling!

An improper sequence order can damage the controller!

WARRANTY/QUALITY:

CE certified.
100% QC before shipment.
Standard 1 year product warranty
Warranty will cover only items that are deemed to fail under normal usage. Accidental damage due to environmental causes or incorrect usage and installation will not be covered in warranty (but still serviceable
Contact us directly for warranty issue.