Description:

1.Voice control:once you have this switch,you can connect it with Amazon  Alexa(Amazon echo/dot/tap) or Google Assistant for voice control.

2.Wi-Fi Remote Control:You can use "Smart Life/tuya" APP in your smart phone to control the switch wirelessly with Wi-Fi or 4G network.no hub required.

3.Timing Function:Take full control of your home or office lights thanks to schedule timer that will allow you to plan the exact time to turn lights and appliances on/off automatically

4.Share Device:This samrt switch can have several control sites shared by different family members.one mobile phone can control many switches also.

Q&A

Q:How do I set the light to fast flash?

①Turn on the device, turn off the power after 10 seconds, and then turn on the power again.

②Long press the operation button 10 seconds.

③Confirm the indicator rapidly blink.

Q: How do I set the light to slow flash?

①Turn on the device, turn off the power after 10 seconds, and then turn on the power again.

②Long press the operation button 10 seconds.

③Confirm the indicator rapidly blink.

④Long press again the operation button for 10 seconds until the light flashes slowly.

Note: The new device will take 1 minute to connect to Wi-Fi and the Internet,

and if it's not connected for a long time, please check your Wi-Fi status.

Q: After adding the device successfully, shows is offline and out of control?

①It may be that the Wi-Fi password was entered incorrectly.

②It may be that the device is too far away from your router, that the signal is too weak, or that there is interference around.

③Check that MAC address filtering is turned on in the base of your router and, if so, please turn it off.

Specifications:

1. Working voltage: AC90-250V 60HZ/50HZ

2. WIF: IEEE 802.11 b/g/n

3. Maximum current:<10A

4. Size:90*38*22(mm)

Package Included:

Smart Light Switch*1

Manual*1