Descripción
Comentarios de clientes(0)

Item specifics

Origin CN(Origin)
Certification ce
Continuous Current(A) DIY Brushless Motor
Commutation Brushless
Model Number DIY Brushless Motor
Type Gear Motor
Protect Feature Drip-proof
Output Power DIY Brushless Motor
Construction Permanent Magnet
Torque DIY Brushless Motor
Usage BoAt
Efficiency IE 3
Continuous Current(A) DIY Brushless Motor
Model Number DIY Brushless Motor 01
Output Power 1-3W
Torque DIY Brushless Motor
Item Type DIY Brushless Motor
Drop Shipping Support
Motor Voltage 5V
Motor Speed 3000-6000Rpm
Motor Feature High Quality Motor
Characteristic New Motor
is_customized Yes
Key Word DIY Motor

Product Description

Product Information:
Power supply: 5V
Size: 9cm*7.5cm*20cm
Power: 1-3W
Shaft size: 13cm*4cm*1.6cm
Speed: 3000-6000Rpm
Uses: DIY hobbies / teaching experiments, etc..
With 5V power supply, the power supply is stable and
does not heat for a long time.
The 3-point magnetic levitation mechanism has a suction magnet
at both ends, and the jitter is almost invisible to the naked eye.
And the glass piece is added, it will not cause any abrasion to the acrylic,
suitable for long-term operation.

Product Feature:
1. WITH USB INTERFACE,Beautifully Designed, Full Rounded Arc
2. High speed Hall sensor activation/High speed stability / long life / high speed
3.Ingenious magnetic suspension/structure / high speed without jitter
4. Glass Plates At Both Ends,Durable!0.4mm High Temperature Enameled Wire
5. 5V power supply / convenient and easy to get / no fever

Instructions:
This product consists of 3 parts: data line / rotor / base
1. First plug one end of the data cable into the base
2. Place the rotor from top to bottom and place it in the position of two round glass pieces.
3. Connect the other end of the data cable to the 5V charger/mobile power
4. Turn on the switch

Note:
1. Do not touch the rotor during high speed operation! Do not use magnets or iron near the equipment!
2. Need to be placed on a horizontally prohibited desktop! Do not shake!
3. If the magnet is loose, tighten the screw and energize it!