packing list:

1pcs xCCTV Camera Metal Housing  with nut, screws, foam ring and so on.

One buyer told there is micro crack inside of body, The lines (not cracks), it's on surface, not inbody.

All C1010A-B have that. it's tool craft reason.That's not quality problem.

If u need order glass, pls confirm the size before shipping, old one use Dia.44mm , new one use Dia. 46mm

 There is a buyer told water enter body from nut part,  pls fasten again before fishing, it's better fasten and glue again in deep fishing zoon.

If buyer order C1010A-B and 2431+imx225/2441+imx307/8550+imx327 the same time,

we will change module from 38*38mm to 32*32mm,

C1010A-B only ok for 32*32 board.

 If no need change, make an note below your order or leave messages.

 Note:

CY-C10101A-A: No stock

CY-C10101A-B: Have stock

CY-C10101A-C: No Stock, Dia.53mm,H1=60mm,H2=78mm

with IR board :CY-C1010A-B nut + IR board(12led board as following pic in right if no speical notes)

CY-C10101A-A  Glass is Glued to body, but can supply a separate nut and water-proof ring, 

CY-C10101A-B   fasten glass by nut and water-proof ring, not glued

CY-C10101A-C   no nut, glass is glued to body( Factory don't supply housing with thread for nut)

Pls note: CY-C1010A-C and CY-C1010C is different product.

Following is other similar housing:

CY-C1010A

CY-C1010A-2

CY-C1010B

CY-C1010CHave new one with nut!

Following IR LED board ( Dia. 44 or 45mm) is ok for CY-C1010A.

Note: 24leds Dia.44mm IR board is not ok for nut.

Click the picture get IR led board link.

The best lens configuration:

30Degree    12mm 16mm Lens

45Degree    8mm Lens

60Degree    6mm Lens

           90Degree    2.8mm 3.6mm 4mm Lens

Following pic will tell what's LED board and Camera Module fit for the housing.

New CY-C1010A  pic is as above.