Spec.	250W 500W

Description
Customer Reviews(0)

Item specifics

Brand Name Aideepen
Certification NONE
Type DC/DC Converters
Origin CN(Origin)
Output Frequency none
Output Type Single
Output Power 201 - 300W
Weight 50g
is_customized Yes
Size Constant Voltage Constant Current Module
Model Number DC-DC Boost Converter
Output Current 10A

Product Description

DC-DC Boost Converter Constant Voltage Constant Current Module Mobile Power Supply 10A 250W 500W LED Driver Step Up Module

Description:

[Module name]: 500W boost constant current module[Module nature]: Non-isolated boost module (BOOST)[Input voltage]: DC8.5V-48V[Input current]: 15A (MAX) over 8A, please strengthen heat dissipation, otherwise it may be damaged[Quiet working current]: 10mA (when 12V rises to 20V, the higher the output voltage, the higher the quiescent current will increase)[Output voltage]: 10-50V continuously adjustable[Output current]: 10A MAX (related to the input and output pressure difference, the greater the pressure difference, the smaller the output current, if the output current exceeds 5A, add a heat sink or fan for heat dissipation)[Constant current range]: 0.2-10A[Output power]: = input voltage*10A, such as: input 12V*15A=180W, input 24V*15A=360W,Input 36V*10A=360W, input 48V*10A=480W,,,If you need more power, you can use two modules in parallel. For example, if the output is 10A, you can use two modules in parallel and adjust the current of each module to 5A.[Working temperature]: -40~+85 degrees (please strengthen heat dissipation when the ambient temperature is too high)[Working frequency]: 150KHz[Conversion efficiency]: up to 96% (efficiency is related to input, output voltage, current, and pressure difference)[Overcurrent protection]: Yes (output over 10A, automatic protection, there is a certain range of error. The protection mode is to stop the boost, the output still has voltage)[Input reverse connection protection]: Yes, (less than 5A, if you need more reverse connection current, please connect a diode in series with the input)[Module size]: length 70mm width 42mm height 13mm[Module weight]: 50 gramsProduct application range:DIY a regulated power supply, input 12V, output can be adjusted from 12-50V.To supply power to your electronic equipment, you can set the output value according to your system voltage.As a car power supply, it can power your laptop, PDA or various digital products.DIY a high-power laptop mobile power supply: equipped with a large-capacity 12V lithium battery pack, so that your books can be bright wherever you go.The solar panel is stabilized.Charge storage batteries, lithium batteries, etc.Precautions:Do not adjust the current in a short-circuit method. The circuit structure of the boost module cannot be adjusted in a short-circuit method. Please make sure that the output voltage is greater than the input voltage; when large current output, please ensure good heat dissipation; when the load is large, the module must first be connected to the input Voltage, then connect the load.

Package Included:

1 x DC DC Boost Converter