Working Voltage: DC3.5V-DC12V

    Wide Range Working Voltage DC3.7V 4.5V 5V 6V 9V 12V

    it can work with DC Power / Rechargeable lithium battery / Rechargeable

Max Load: 1A (have better Load less than 700ma)

Quiescent Current: 5ma

Relay Working Current: 20-30ma

Size: 25*11*8mm

Working Mode:   Momentary Toggle Latched adjustable  

How to change working mode :

Momentary : Connect the right side 2 points (M)

Latched : Connect the left side 2 points (L)

Toggle : Let Point L and Point M in non-occupation

Encoding Type: Learning Dot to add Transmitter

Normally Open Port (NO)      Common Port (COM)    Normally Close Port (NC)

Input DC3.5V-DC12V  Output 0V Switching Value

Momentary------------press one button is working /ON. loosen your finger on the same button is stop/OFF

Toggle---------------press one button for one time is working/ON .press the same button again is stop/OFF .

Latched------------------press one button is working/ON ,press another button is stop/OFF .

Learning Code :

Latched:

Input 3.5V-12V for the Receiver , Connect the Learning Dot, The receiver Led indicator ON. Press remote button A 1 time, Led indicator flash for 3 times , Then Press remote button B 1 time , Led indicator flash for 3 times again , it mean learning successfully.

Momentary / Toggle :

Input 3.5V-12V for the Receiver , Connect the Learning Dot, The receiver Led indicator ON. Press remote button A 1 time, Led indicator flash for 3 times , Then Press remote button A 1 time again , Led indicator flash for 3 times again , it mean learning successfully.


Clearing Code:

Connect the Learning Dot 5 seconds  . Until the receiver Led indicator From ON to OFF, it mean Clearing Code


 

Package Include:

   1 x Receiver

   1 x Transmitter