Description
Customer Reviews(0)

Item specifics

Motor Type Stepper Motor
Certification NONE
Origin CN(Origin)
Power Supply DC
Model Number Multifunction Stepper Motor Driver

Product Description

Basic parameters: [Voltage range] DC5V-12V [rated current] ≤ 800mA [Power reverse connection protection] yes [Overcurrent protection] yes [overheat protection] yes H32f34c3886924e0d8d29f300dcf27256S (1)

Working mode:

[1] Normal mode 1: S1 start/stop button, S2 forward/backward button, W2 potentiometer speed control. If limit reversal is required, two limit switches can be connected to the P3 pin, and the motor motion shaft is mounted with contacts, so that the motor will reciprocate within the stroke between the two limit switches. [2] Normal mode 2: Click S1 button to start forwards, S2 backwards, click any button again to stop. W2 potentiometer speed regulation. If the limit stop is required, two limit switches can be connected to the P3 pin, so that the motor will stop moving when it touches the limit switch, and the motor will reverse after the opposite button is clicked. [3] Jog mode: S1 presses the forward rotation, releases the stop, S2 presses the reverse rotation, releases the stop, and the W2 potentiometer adjusts the speed. If a limit stop is required, the upper limit switch can be connected to P3. [4] Automatic round-trip mode: S1 starts and stops, S2 is reversed, W2 potentiometer speeds, and W1 potentiometer adjusts the automatic round-trip steps. After starting, the motor automatically runs back and forth within the number of steps adjusted by W1.